GE DS200DCFBG1B DS200DCFBG1BGB | Power Supply Board

The GE DS200DCFBG1B DS200DCFBG1BGB belongs to the Mark V series. General Electric designed this board as a DC power supply unit. This component converts incoming power for control circuits. It also distributes clean voltage to adjacent modules.

Technical Specifications

The table below lists all key parameters for the GE DS200DCFBG1B DS200DCFBG1BGB.

Parameter	Specification
Manufacturer	General Electric (GE)
Full Model	DS200DCFBG1B / DS200DCFBG1BGB
Product Type	DC Power Supply Board
Series	Mark V
Width	10.0 inches (25.4 cm)
Height	7.0 inches (17.8 cm)
Weight	1.0 lb (0.45 kg)
Component Count	Over 150 surface-mount devices
Main Interface	One 64-pin male DIN connector
Input Voltage	125 VDC nominal
Output Voltages	5 VDC and 24 VDC
Energy Storage	Large aluminum electrolytic capacitors
Status Indicators	Two LEDs (power good and fault)

Power Conversion Features

The GE DS200DCFBG1B DS200DCFBG1BGB uses a rugged four-layer PCB. Over 150 resistors, capacitors, and diodes regulate DC power. A single 64-pin DIN connector links this board to the backplane. Consequently, clean power flows to all connected modules. Two onboard LEDs show power good and fault status. Moreover, large electrolytic capacitors store energy for short hold-up times.

Input and Output Specifications

You must supply 125 VDC nominal to this power supply board. The GE DS200DCFBG1B DS200DCFBG1BGB then produces 5 VDC and 24 VDC outputs. These outputs serve logic circuits and I/O interfaces. Therefore, this board eliminates the need for external power converters. Always handle this power supply board by its edges. This precaution prevents electrostatic discharge damage.

Energy Storage and Ripple Filtering

Large aluminum electrolytic capacitors provide short-term energy storage. Consequently, the board maintains output during brief input interruptions. These capacitors also filter voltage ripple effectively. As a result, connected modules receive stable DC power. The robust design handles continuous industrial operation.

Mechanical Layout

This power supply board measures exactly 25.4 cm in width. Its height reaches 17.8 cm. The total weight equals just 0.45 kg. As a result, this board saves valuable rack space. The lightweight design also reduces stress on the backplane connector. You get reliable power conversion from this industrial-grade board.

Installation Context

You must install this board inside a protected Mark V cabinet. The board works alongside other DS200 I/O and processor cards. Its compact size allows easy placement near the main controller. Choose the GE DS200DCFBG1B DS200DCFBG1BGB for your turbine power supply needs.