GE DS200SIOBH1A DS200SIOBH1ABA

The GE DS200SIOBH1A DS200SIOBH1ABA belongs to the Mark VI series. General Electric designed this card as an input/output control unit. This component manages digital and analog signals from field devices. It also sends processed data to the main controller.

Technical Specifications

The table below lists all key parameters for the GE DS200SIOBH1A DS200SIOBH1ABA.

Parameter	Specification
Manufacturer	General Electric (GE)
Full Model	DS200SIOBH1A / DS200SIOBH1ABA
Product Type	Input/Output Control Card
Series	Mark VI
Width	10.0 inches (25.4 cm)
Height	7.0 inches (17.8 cm)
Weight	1.0 lb (0.45 kg)
Component Count	Over 160 surface-mount devices
Main Interface	One 64-pin male DIN connector
Digital Inputs	16 optically isolated channels
Digital Outputs	16 open-collector channels
Analog Inputs	4 differential 12-bit channels
Energy Storage	Ceramic and tantalum capacitors
Status Indicators	Four LEDs (power, run, fault, I/O)

Signal Processing Features

The GE DS200SIOBH1A DS200SIOBH1ABA uses a rugged four-layer PCB. Over 160 resistors, capacitors, and optocouplers process I/O signals. A single 64-pin DIN connector links this card to the backplane. Consequently, I/O data moves quickly to the main processor. Four onboard LEDs show power, run, fault, and I/O status. Moreover, tantalum capacitors provide stable energy storage for analog circuits.

Digital and Analog Capabilities

You get 16 optically isolated digital inputs on this card. These inputs protect the controller from field voltage spikes. The GE DS200SIOBH1A DS200SIOBH1ABA also provides 16 open-collector digital outputs. Four differential analog inputs offer 12-bit resolution each. Therefore, this card handles both discrete and continuous signals effectively.

Power Requirements and Energy Storage

You must install this card inside a protected Mark VI cabinet. The backplane supplies 5 VDC and 24 VDC to the GE DS200SIOBH1A DS200SIOBH1ABA. Ceramic capacitors filter high-frequency noise on power lines. Tantalum capacitors provide short-term energy for analog circuits. Always handle this I/O control card by its edges. This precaution prevents electrostatic discharge damage.

Mechanical Layout

This I/O control card measures exactly 25.4 cm in width. Its height reaches 17.8 cm. The total weight equals just 0.45 kg. As a result, this card saves valuable rack space. The lightweight design also reduces stress on the backplane connector. You get reliable signal interfacing from this industrial-grade card.

Installation Context

This card works alongside other Mark VI processor and power boards. Its compact size allows easy placement in crowded cabinets. The robust design handles continuous industrial operation. Choose the GE DS200SIOBH1A DS200SIOBH1ABA for your turbine I/O control needs.