GE IC200MDL650C | VersaMax Input Module 24V DC 16 Channels

The IC200MDL650C reads digital signals from field sensors and pushbuttons. This input module serves the VersaMax PLC platform from GE reliably. It provides sixteen discrete channels for monitoring machine states. Consequently, you can track limit switches, proximity sensors, and operator controls.

You can wire this module for either sinking or sourcing field devices. The IC200MDL650C accepts 24V DC signals from a wide range of sensors. Each channel includes optical isolation for excellent electrical noise rejection. Therefore, this module delivers clean input data to your control logic.

Input Specifications and Channel Details

The module features sixteen input channels with a common return arrangement. Each channel on the IC200MDL650C detects logic high above 15V DC. It recognizes logic low when the input voltage falls below 5V DC. The module filters input signals to prevent false triggering from electrical noise.

Inputs respond to state changes within 1 millisecond typically. The IC200MDL650C draws approximately 7 mA per active input channel. An LED on the front panel illuminates when the corresponding input activates. Below is a complete breakdown of its technical characteristics.

Specification	Detail
Number of Inputs	16 (Sinking or Sourcing)
Input Voltage Range	0 to 30V DC (24V DC nominal)
Logic High Threshold	> 15V DC (Minimum)
Logic Low Threshold	< 5V DC (Maximum)
Input Current per Channel	7 mA at 24V DC (Typical)
Input Response Time	1 ms (On to Off or Off to On)
Isolation Voltage	1500V AC (Input to backplane)
Dimensions (W x H x D)	58 mm x 115 mm x 68 mm
Weight	0.13 kg (130 grams)
Power Draw (5V)	60 mA
Power Draw (24V field)	112 mA (All inputs active)
Energy Storage	None (No battery or capacitor)

Interface and Field Wiring Connections

A removable terminal block accepts all field input wiring. The IC200MDL650C uses a 20-pin connector for secure signal termination. Each terminal accepts wire sizes from 0.2 to 2.5 mm². The module connects to the VersaMax backplane via a standard bus connector.

You can connect both normally open and normally closed contacts easily. The IC200MDL650C automatically senses the presence of input voltage. Green LEDs provide visual confirmation of each active channel. Therefore, troubleshooting field wiring becomes a fast visual task for maintenance.

Operational Benefits for Control Applications

This input module interfaces directly with standard 24V DC sensors. The IC200MDL650C works with proximity switches, limit switches, and photoelectric sensors. Its filtered inputs ignore electrical noise from motors and variable drives. Engineers trust this module for reliable machine status monitoring in factory automation.