GE DS200VPBLG1A DS200VPBLG1AEE | VME Backplane Board

The GE DS200VPBLG1A DS200VPBLG1AEE belongs to the Mark V series. General Electric designed this board as a VME backplane unit. This component provides mechanical support for multiple control cards. It also distributes power and signals between all connected modules.

Technical Specifications

The table below lists all key parameters for the GE DS200VPBLG1A DS200VPBLG1AEE.

Parameter	Specification
Manufacturer	General Electric (GE)
Full Model	DS200VPBLG1A / DS200VPBLG1AEE
Product Type	VME Backplane Board
Series	Mark V
Width	10.0 inches (25.4 cm)
Height	7.0 inches (17.8 cm)
Weight	1.0 lb (0.45 kg)
Component Count	Passive backplane with 21 slots
Main Interface	VME 64x P1/P2 connectors
Slot Quantity	21 positions for VME cards
Data Bus Width	32-bit multiplexed
Address Bus Width	32-bit
Power Distribution	5 VDC, ±12 VDC, 24 VDC rails
Energy Storage	Decoupling capacitors on each slot
Status Indicators	No LEDs (passive design)

VME Backplane Features

The GE DS200VPBLG1A DS200VPBLG1AEE uses a rugged multi-layer PCB. This passive backplane contains no active components for high reliability. Twenty-one VME slots accept standard 6U form factor cards. A VME 64x P1/P2 connector system links all modules together. Consequently, data moves seamlessly between processor and I/O cards. Decoupling capacitors on each slot provide local energy storage for connected boards.

Bus Architecture and Connectivity

You get a 32-bit multiplexed data bus on this backplane board. The address bus also operates at 32-bit width for full addressing. The GE DS200VPBLG1A DS200VPBLG1AEE distributes 5 VDC, ±12 VDC, and 24 VDC power rails. Each slot receives clean power through dedicated traces. Therefore, this backplane supports high-speed communication between all VME cards.

Power Distribution and Energy Storage

You must install this backplane inside a protected Mark V cabinet. The main power supply connects to dedicated input terminals. The GE DS200VPBLG1A DS200VPBLG1AEE routes power to all 21 slots evenly. Decoupling capacitors filter noise and provide short-term energy for each card. As a result, connected modules operate without interference from each other.

Mechanical Layout

This VME backplane board measures exactly 25.4 cm in width. Its height reaches 17.8 cm. The total weight equals just 0.45 kg. As a result, this board fits standard Mark V card cages. The lightweight design simplifies handling during installation. Always handle this backplane board by its edges. This precaution prevents damage to slot connectors and PCB traces.

Installation Context

This board works as the central backbone for all Mark V cards. You insert processor, I/O, and communication cards into its 21 slots. The passive design means no firmware or configuration is required. Choose the GE DS200VPBLG1A DS200VPBLG1AEE for your VME card cage needs.