GE DS200NATOG2A DS200NATOG2ACB | Voltage FB Scaling

The GE DS200NATOG2A DS200NATOG2ACB belongs to the Mark V series. General Electric designed this board as a voltage feedback scaling unit. This component accepts high-voltage signals from potential transformers. It also scales these signals for analog input circuits.

Technical Specifications

The table below lists all key parameters for the GE DS200NATOG2A DS200NATOG2ACB.

Parameter	Specification
Manufacturer	General Electric (GE)
Full Model	DS200NATOG2A / DS200NATOG2ACB
Product Type	Voltage Feedback Scaling Board
Series	Mark V
Width	10.0 inches (25.4 cm)
Height	7.0 inches (17.8 cm)
Weight	1.0 lb (0.45 kg)
Component Count	Over 120 surface-mount devices
Main Interface	One 64-pin male DIN connector
Voltage Input Channels	6 differential high-voltage inputs
Input Voltage Range	0 to 600 V AC nominal
Scaling Ratio	1000:1 precision resistor dividers
Output Voltage Range	0 to 0.6 V AC
Accuracy	±0.2% of reading
Energy Storage	Ceramic and film capacitors
Status Indicators	Two LEDs (power and scaling active)

Voltage Scaling Features

The GE DS200NATOG2A DS200NATOG2ACB uses a rugged four-layer PCB. Over 120 precision resistors, capacitors, and protection diodes scale voltage signals. A single 64-pin DIN connector links this board to the backplane. Consequently, scaled voltage data reaches the main processor accurately. Two onboard LEDs show power and scaling active status. Moreover, film capacitors filter noise on analog output lines.

Input and Output Capabilities

You get six differential high-voltage input channels on this scaling board. Each channel accepts 0 to 600 V AC from potential transformers. The GE DS200NATOG2A DS200NATOG2ACB uses 1000:1 precision resistor dividers for scaling. Each channel outputs 0 to 0.6 V AC to analog inputs. Therefore, this board converts dangerous high voltages to safe measurement levels.

Accuracy and Protection

Precision resistors maintain ±0.2% accuracy across the full input range. Protection diodes clamp voltage spikes during fault conditions. The GE DS200NATOG2A DS200NATOG2ACB also provides galvanic isolation between input and output. As a result, downstream analog circuits remain safe from high-voltage transients. Always handle this scaling board by its edges. This precaution prevents electrostatic discharge damage.

Power and Energy Storage

You must install this board inside a protected Mark V cabinet. The backplane supplies 5 VDC to the GE DS200NATOG2A DS200NATOG2ACB. Ceramic capacitors filter high-frequency noise on power lines. Film capacitors store energy for stable analog output references. Consequently, the board delivers consistent scaling performance over time.

Mechanical Layout

This voltage feedback board measures exactly 25.4 cm in width. Its height reaches 17.8 cm. The total weight equals just 0.45 kg. As a result, this board saves valuable rack space. The lightweight design also reduces stress on the backplane connector.

Installation Context

This board works alongside other Mark V analog input and processor cards. Its compact size allows easy placement near PT wiring. The robust design handles continuous industrial monitoring. Choose the GE DS200NATOG2A DS200NATOG2ACB for your voltage feedback scaling needs.