GE DS200NATOG3A DS200NATOG3ACB

The GE DS200NATOG3A DS200NATOG3ACB belongs to the Mark V series. General Electric designed this board as a feedback scaling unit. This component conditions analog signals from field sensors. It also scales these signals for the main processor inputs.

Technical Specifications

The table below lists all key parameters for the GE DS200NATOG3A DS200NATOG3ACB.

Parameter	Specification
Manufacturer	General Electric (GE)
Full Model	DS200NATOG3A / DS200NATOG3ACB
Product Type	Feedback Scaling Board
Series	Mark V
Width	10.0 inches (25.4 cm)
Height	7.0 inches (17.8 cm)
Weight	1.0 lb (0.45 kg)
Component Count	Over 125 surface-mount devices
Main Interface	One 64-pin male DIN connector
Analog Input Channels	8 differential feedback inputs
Input Voltage Range	±10 V DC, ±20 mA
Scaling Options	Programmable gain settings (1 to 100)
Output Voltage Range	0 to 5 V DC or 0 to 10 V DC
Accuracy	±0.1% of full scale
Energy Storage	Ceramic and tantalum capacitors
Status Indicators	Two LEDs (power and scaling active)

Feedback Scaling Features

The GE DS200NATOG3A DS200NATOG3ACB uses a rugged four-layer PCB. Over 125 precision resistors, op-amps, and capacitors condition feedback signals. A single 64-pin DIN connector links this board to the backplane. Consequently, scaled feedback reaches the main processor accurately. Two onboard LEDs show power and scaling active status. Moreover, tantalum capacitors provide stable energy for analog circuits.

Input and Scaling Capabilities

You get eight differential analog input channels on this scaling board. Each channel accepts ±10 V DC or ±20 mA signals. The GE DS200NATOG3A DS200NATOG3ACB offers programmable gain settings from 1 to 100. You can select output ranges of 0 to 5 V DC or 0 to 10 V DC. Therefore, this board adapts to various sensor types and measurement needs.

Accuracy and Configuration

Precision op-amps maintain ±0.1% accuracy across the full input range. Jumper settings allow easy gain configuration without special tools. The GE DS200NATOG3A DS200NATOG3ACB also provides input protection against overvoltage. As a result, downstream analog circuits remain safe from field wiring errors. Always handle this scaling board by its edges. This precaution prevents electrostatic discharge damage.

Power and Energy Storage

You must install this board inside a protected Mark V cabinet. The backplane supplies 5 VDC and ±15 VDC to the GE DS200NATOG3A DS200NATOG3ACB. Ceramic capacitors filter high-frequency noise on power lines. Tantalum capacitors store energy for stable analog references. Consequently, the board delivers consistent scaling performance over time.

Mechanical Layout

This feedback scaling board measures exactly 25.4 cm in width. Its height reaches 17.8 cm. The total weight equals just 0.45 kg. As a result, this board saves valuable rack space. The lightweight design also reduces stress on the backplane connector.

Installation Context

This board works alongside other Mark V analog input and processor cards. Its compact size allows easy placement near field wiring. The robust design handles continuous industrial monitoring. Choose the GE DS200NATOG3A DS200NATOG3ACB for your feedback scaling needs.