GE DS200TBQCG1A DS200TBQCG1ABB RST Extension Analog Termination Board

Key Technical Specifications

This GE DS200TBQCG1A DS200TBQCG1ABB board operates from a 24V DC power supply. It terminates 16 analog input signals for RST turbine systems. The unit measures 22 cm in length, 17 cm in width, and 4.5 cm in height. Its total weight reaches 0.7 kg without any packaging materials.

The GE DS200TBQCG1A DS200TBQCG1ABB includes 16 differential analog input channels with filtering. Additionally, it features one 50-pin ribbon connector for host interface. A single 6-pin terminal block connects the DC power input. The board contains 16 analog conditioners, 1 FPGA, 8 voltage regulators, 24 resistors, and 18 capacitors.

GE DS200TBQCG1A DS200TBQCG1ABB stores energy using one electrolytic capacitor. This capacitor provides 100 µF at 35V rating for input filtering. Consequently, the board maintains stable readings during 20 millisecond power fluctuations. Therefore, measurement accuracy remains high in noisy industrial environments.

Design and Integration

Both the GE DS200TBQCG1A and DS200TBQCG1ABB versions share identical termination circuitry. These boards use four-layer PCB construction with guarded analog traces for noise rejection. Consequently, the GE DS200TBQCG1A DS200TBQCG1ABB operates reliably from -10°C to +55°C ambient temperature.

For installation, you need M3 screws for the four mounting holes. The board draws 150 mA typical current from the 24V DC supply. Each input channel provides software selectable gain and filtering. We recommend using shielded twisted-pair cables for all sensor connections.

Practical Application

This RST extension analog termination board connects field sensors to an RST turbine analog input module. It terminates signals from thermocouples, RTDs, and pressure transmitters. The GE DS200TBQCG1A DS200TBQCG1ABB then routes conditioned analog signals to the host controller. Therefore, it expands analog input capacity for GE RST turbine control systems.