GE DS200PCCAG6A DS200PCCAG6ACB | Power Connect Board

The GE DS200PCCAG6A DS200PCCAG6ACB belongs to the Mark VI series. General Electric designed this board as a power connect unit. This component distributes DC power to multiple control modules. It also provides basic filtering for incoming supply lines.

Technical Specifications

The table below lists all key parameters for the GE DS200PCCAG6A DS200PCCAG6ACB.

Parameter	Specification
Manufacturer	General Electric (GE)
Full Model	DS200PCCAG6A / DS200PCCAG6ACB
Product Type	Power Connect Board
Series	Mark VI
Width	10.0 inches (25.4 cm)
Height	7.0 inches (17.8 cm)
Weight	1.0 lb (0.45 kg)
Component Count	Over 115 surface-mount devices
Main Interface	One 64-pin male DIN connector
Power Inputs	5 VDC and 24 VDC from backplane
Distribution Channels	8 fused output channels
Maximum Load per Channel	2 A at 24 VDC
Energy Storage	Ceramic and aluminum capacitors
Status Indicators	Two LEDs (power and distribution)

Power Distribution Features

The GE DS200PCCAG6A DS200PCCAG6ACB uses a rugged four-layer PCB. Over 115 resistors, capacitors, and fuses manage power distribution. A single 64-pin DIN connector links this board to the backplane. Consequently, clean power flows to all connected modules. Two onboard LEDs show power input and distribution status. Moreover, aluminum capacitors provide short-term energy storage for transient loads.

Input and Output Capabilities

You must install this board inside a protected Mark VI cabinet. The backplane supplies 5 VDC and 24 VDC to the GE DS200PCCAG6A DS200PCCAG6ACB. This board provides eight fused output channels for external modules. Each channel supports up to 2 amps at 24 VDC. Therefore, this board protects downstream circuits from overcurrent conditions.

Energy Storage and Filtering

Ceramic capacitors filter high-frequency noise on input power lines. Aluminum capacitors store energy for short-duration load spikes. Consequently, connected modules receive stable voltage during transient events. The robust design handles continuous industrial operation without overheating. Always handle this power connect board by its edges. This precaution prevents electrostatic discharge damage.

Mechanical Layout

This power connect board measures exactly 25.4 cm in width. Its height reaches 17.8 cm. The total weight equals just 0.45 kg. As a result, this board saves valuable rack space. The lightweight design also reduces stress on the backplane connector. You get reliable power distribution from this industrial-grade board.

Installation Context

This board works alongside other Mark VI I/O and processor cards. Its compact size allows easy placement near power-hungry modules. The fused outputs provide simple overcurrent protection. Choose the GE DS200PCCAG6A DS200PCCAG6ACB for your turbine power distribution needs.