MeloAuto-Trusted PLC & DCS Parts Supplier
The GE DS200MSTCF1B DS200MSTCF1BFA master control board serves as the main processor for GE Mark V systems. This board executes all turbine control algorithms and logic functions. You will find this master board in the central rack of Mark V cabinets. Its high-performance design ensures deterministic real-time control.
Processing Architecture
This master control board uses a 100 MHz 32-bit RISC processor. Consequently, it handles complex control loops with sub-millisecond cycle times. The GE DS200MSTCF1B DS200MSTCF1BFA includes both volatile and non-volatile memory for data storage. Moreover, eight status LEDs provide complete operational feedback. You can monitor processor health directly from the board.
Technical Specifications
| Parameter | Value |
|---|---|
| Processor Speed | 100 MHz |
| CPU Type | 32-bit RISC |
| RAM Capacity | 16 MB SDRAM |
| Flash Memory | 8 MB (application storage) |
| Non-Volatile RAM | 1 MB (retentive data) |
| Watchdog Timer | Hardware, 100 ms timeout |
| Input Voltage | 5V DC from backplane |
| Power Consumption | 12W typical |
| Dimensions | 240mm x 180mm x 35mm |
| Weight | 0.78 kg (1.72 lbs) |
| PCB Layers | 8 |
| Onboard Components | 1 CPU, 8 memory chips, 2 FPGA, 1 RTC, 1 watchdog |
| Connector Count | 4 (backplane, diagnostic, battery, sync) |
| Status Indicators | 8 LEDs (run, fault, sync, active, standby, comm, watchdog, power) |
| Energy Storage | 1000 µF (power hold-up) |
| Real-Time Clock | Battery-backed, ±2 min/year |
| Operating Temperature | 0°C to +50°C |
| Storage Temperature | -20°C to +70°C |
Memory Management and Redundancy
The unit includes 16 MB of SDRAM for real-time data processing. Therefore, it can store extensive diagnostic logs and trend data. This board replaces the DS200MSTCF1BFA version without any program changes. Simply swap the boards and reload application code. GE designed this master board for hot-standby redundancy. Hence, two boards can operate in sync for fault-tolerant control.
Eight PCB layers separate high-speed digital traces from power and analog signals. Four connectors handle all backplane, diagnostic, and synchronization signals. The GE DS200MSTCF1B DS200MSTCF1BFA holds 1000 µF of capacitance for power hold-up. Accordingly, it survives brief power interruptions without resetting. A battery-backed real-time clock maintains accurate timestamps during outages.
Watchdog and Installation Guide
A hardware watchdog timer resets the processor if software stalls. The board logs watchdog events for diagnostic analysis. The GE DS200MSTCF1B DS200MSTCF1BFA works with all GE Mark V I/O boards. Always verify firmware revision compatibility before installation. Redundant configurations require matched firmware on both master boards.
Proper grounding of the chassis ensures noise-free processor operation. The board includes a lithium battery for RTC and NV-RAM. The GE DS200MSTCF1B DS200MSTCF1BFA delivers reliable turbine control processing. Installation requires careful handling of static-sensitive components. This board operates in non-condensing environments with adequate cooling.