MeloAuto-Trusted PLC & DCS Parts Supplier
The GE DS200IMCPG1A DS200IMCPG1ADA Power Supply Interface Board distributes control power across drive system modules. This board accepts raw 24 VDC input from an external bulk supply. It then conditions and routes power to multiple internal circuit boards. You will find it supplying IGBT gate drivers, logic circuits, and communication interfaces.
Core Technical Specifications
The GE DS200IMCPG1A DS200IMCPG1ADA Power Supply Interface Board measures 29.0 cm in width and 21.0 cm in height. Its board depth equals 2.5 cm for standard panel mounting. The total assembly weighs approximately 0.60 kilograms. Six independent power output channels populate the board’s front section. Each channel includes individual short-circuit and overcurrent protection.
| Parameter | Specification |
|---|---|
| Input Voltage | 24 VDC ±15% (Single Bulk Supply) |
| Number of Outputs | 6 Independent Power Channels |
| Output Voltage Options | 5 VDC, 12 VDC, or 24 VDC (Regulated) |
| Maximum Current per Output | 2.5 A (Continuous) |
| Total Output Power | 45 W Maximum (All Channels Combined) |
| Efficiency | 87% Typical at Full Load |
| Dimensions (W x H x D) | 29.0 cm x 21.0 cm x 2.5 cm |
| Weight | 0.60 kg (approx) |
Connectors and Voltage Selection Jumpers
The GE DS200IMCPG1A DS200IMCPG1ADA Power Supply Interface Board uses two 20-pin header connectors for output distribution. One 3-position terminal block accepts the main 24 VDC input cable. Six miniature jumper blocks allow independent voltage selection per output channel. Set each jumper to 5V, 12V, or 24V according to your specific load needs. Six green LEDs confirm proper output voltage presence on each active channel. A red LED illuminates when any output experiences an overload or short circuit.
Regulation and Protection Circuitry
This power interface board employs high-efficiency switching regulator technology throughout. The board maintains ±3% voltage regulation across all load and temperature conditions. Each output channel includes overcurrent shutdown with automatic retry after fault clearance. Furthermore, the GE DS200IMCPG1A DS200IMCPG1ADA Power Supply Interface Board integrates input reverse polarity protection. This feature prevents permanent damage from accidental wiring errors during field installation.
Energy Storage and Thermal Requirements
This board contains electrolytic filter capacitors on both input and output stages. These capacitors store approximately 4.5 joules of energy at full operating voltage. Therefore, the board retains dangerous energy for several seconds after power removal. The GE DS200IMCPG1A DS200IMCPG1ADA Power Supply Interface Board requires adequate airflow for reliable long-term operation. Mount the board vertically to maximize natural convection cooling around components. Do not exceed 45 W total output power under any operating condition. Replace the board immediately if any capacitor shows bulging or leakage signs.