MeloAuto-Trusted PLC & DCS Parts Supplier
The GE DS200DTBCG1A DS200DTBCG1AAA Connector Relay Terminal Board combines relay outputs with terminal block organization. This board interfaces between the drive controller and high-power field devices. You will find it switching contactors, solenoids, and indicator lamps reliably. It simplifies both wiring and maintenance in crowded drive cabinets.
Core Technical Specifications
The GE DS200DTBCG1A DS200DTBCG1AAA Connector Relay Terminal Board measures 34.0 cm in width and 18.0 cm in height. Its board depth equals 4.0 cm including relay and terminal heights. The total assembly weighs approximately 0.55 kilograms. Sixteen electromechanical relays populate the board’s surface area. Each relay provides Form-C (SPDT) contacts for flexible wiring options.
| Parameter | Specification |
|---|---|
| Number of Relays | 16 Sealed Electromechanical Relays |
| Contact Form | Form-C (SPDT, NO and NC Contacts) |
| Contact Rating | 5 A @ 125 VDC / 250 VAC (Resistive) |
| Coil Voltage | 24 VDC ±10% |
| Terminal Type | Screw Clamp, 36 Positions |
| Wire Gauge | 18 AWG to 14 AWG (Stranded Copper) |
| Dimensions (W x H x D) | 34.0 cm x 18.0 cm x 4.0 cm |
| Weight | 0.55 kg (approx) |
Connectors and Interface Headers
The GE DS200DTBCG1A DS200DTBCG1AAA Connector Relay Terminal Board uses one 50-pin ribbon cable header for control signals. This header carries all 16 relay coil drive signals from the main controller. Thirty-six screw terminal blocks provide connection points for field wiring. Each terminal accepts common terminal, normally open, and normally closed contacts. A clear silkscreen label identifies every relay number and contact position.
Status Indication and Protection
This relay board includes a green LED for each individual relay coil. Each LED illuminates when the corresponding relay energizes. Moreover, the GE DS200DTBCG1A DS200DTBCG1AAA Connector Relay Terminal Board integrates a flyback diode across every relay coil. This diode suppresses voltage spikes from inductive load switching. A red LED indicates proper 24 VDC auxiliary power presence. The board also includes a common ground terminal for all relay returns.
Energy Storage and Installation Guidelines
This relay terminal board contains no electrolytic capacitors on any circuit. Therefore, it stores absolutely zero energy after power disconnection. The GE DS200DTBCG1A DS200DTBCG1AAA Connector Relay Terminal Board operates from 0°C to +55°C ambient temperature. Mount the board vertically on standard DIN rail or cabinet backplate. Torque all terminal screws to 5-7 inch-pounds for reliable field connections. Do not exceed 5 A per relay contact under continuous operation. Replace individual relays using a standard IC extractor tool.