MeloAuto-Trusted PLC & DCS Parts Supplier
The GE DS200DTBBG1A DS200DTBBG1ABB Terminal Digital Connector Board interfaces discrete signals between drives and field devices. This board connects the main controller to sensors, push buttons, and indicator lamps. You will find it organizing all digital I/O wiring into a single location. It simplifies troubleshooting and maintenance in drive cabinets.
Core Technical Specifications
The GE DS200DTBBG1A DS200DTBBG1ABB Terminal Digital Connector Board measures 30.0 cm in width and 16.0 cm in height. Its board depth equals 3.0 cm including terminal block heights. The total assembly weighs approximately 0.42 kilograms. Forty digital I/O points populate the board’s surface area. Twenty-four channels serve as discrete inputs. The remaining sixteen channels act as discrete outputs.
| Parameter | Specification |
|---|---|
| Digital Inputs | 24 Channels, 24 VDC Sink/Source |
| Digital Outputs | 16 Channels, Open Collector Transistor |
| Input Voltage Range | 10-30 VDC (24 VDC Nominal) |
| Output Current | 0.5 A per Channel (Maximum) |
| Terminal Type | Screw Clamp, 40 Positions |
| Wire Gauge | 18 AWG to 14 AWG (Stranded Copper) |
| Dimensions (W x H x D) | 30.0 cm x 16.0 cm x 3.0 cm |
| Weight | 0.42 kg (approx) |
Connectors and Interface Headers
The GE DS200DTBBG1A DS200DTBBG1ABB Terminal Digital Connector Board uses two 50-pin ribbon cable headers for signal interface. One header carries all 24 input signals to the main controller. The second header routes 16 output signals from the controller. Forty screw terminal blocks provide connection points for field wiring. A clear silkscreen label identifies each terminal’s signal name and function.
Status Indicators and Protection
This digital connector board includes a green LED for every input and output channel. Each LED illuminates when the corresponding signal becomes active. Moreover, the GE DS200DTBBG1A DS200DTBBG1ABB Terminal Digital Connector Board integrates optocoupler isolation on all inputs. This isolation separates the logic ground from field ground completely. Each output channel contains a self-resetting PTC fuse for overload protection. A red LED indicates proper 24 VDC auxiliary power presence.
Energy Storage and Installation Guidelines
This digital connector board contains no electrolytic capacitors on any signal path. Therefore, it stores absolutely zero energy after power disconnection. The GE DS200DTBBG1A DS200DTBBG1ABB Terminal Digital Connector Board operates from 0°C to +55°C ambient temperature. Mount the board on standard DIN rail or directly on the cabinet backplate. Torque all terminal screws to 5-7 inch-pounds for reliable field connections. Do not exceed 0.5 A on any output channel continuously. Use external relays for loads above this current rating. Keep input wiring separated from output wiring where possible.