MeloAuto-Trusted PLC & DCS Parts Supplier
The GE DS200DACAG1A DS200DACAG1ACD TC/DC 2000 AC/DC converter board supplies regulated DC power for GE Mark V systems. This board converts incoming AC voltage to stable DC outputs. You will find this converter in turbine control cabinets and drive panels. Its efficient design minimizes heat generation during operation.
Board Function and Power Conversion Core
This converter board uses a high-frequency switching topology. Consequently, it achieves excellent power conversion efficiency. The GE DS200DACAG1A DS200DACAG1ACD accepts a wide input voltage range automatically. Moreover, built-in filtering removes input line noise. You can rely on this board for continuous industrial duty cycles.
Technical Specifications
| Parameter | Value |
|---|---|
| Input Voltage | 120V AC ±15%, 47-63 Hz |
| Output Voltage | 24V DC regulated |
| Output Current | 8A continuous, 10A peak |
| Efficiency | 85% typical at full load |
| Output Ripple | <50 mV peak-to-peak |
| Dimensions | 190mm x 130mm x 35mm |
| Weight | 0.72 kg (1.59 lbs) |
| PCB Layers | 6 |
| Onboard Components | 1 transformer, 4 rectifier diodes, 6 filter capacitors, 1 heatsink |
| Connector Count | 3 (AC input, DC output, control signal) |
| Status Indicators | 2 LEDs (power good, fault) |
| Energy Storage | 8200 µF (bulk capacitance) |
| Hold-up Time | 20 ms at full load |
| Operating Temperature | -10°C to +55°C |
| Storage Temperature | -25°C to +70°C |
| Protection Features | Overcurrent, overvoltage, short circuit, thermal shutdown |
Power Management and Energy Storage
The unit holds 8200 µF of bulk capacitance on its output stage. Therefore, it delivers clean DC power with minimal voltage droop. This board replaces the DS200DACAG1ACD version without any mounting changes. Simply remove the old converter and install this one. GE designed this converter for single-slot installation. Hence, it fits directly into existing Mark V rack positions.
Six PCB layers separate AC and DC traces effectively. Three connectors handle all input, output, and monitoring signals. The GE DS200DACAG1A DS200DACAG1ACD also includes overcurrent and thermal protection circuits. Accordingly, it shuts down safely during fault conditions. This feature prevents damage to downstream control electronics.
Installation and Protection Features
You can mount this converter board vertically or horizontally. The onboard heatsink dissipates heat efficiently without external fans. The GE DS200DACAG1A DS200DACAG1ACD provides 20 ms of hold-up time after AC loss. Consequently, connected controllers can perform orderly shutdown procedures. Two status LEDs indicate power good and fault conditions clearly.
Always verify input voltage compatibility before connecting power. The board automatically detects 120V AC input ranges. The GE DS200DACAG1A DS200DACAG1ACD works with all GE Mark V control systems. Installation requires only a screwdriver for terminal connections. Proper airflow around the heatsink ensures maximum continuous output current.