GE A350-2900-T296/04 Circuit Board

This circuit board provides discrete I/O interface for GE industrial automation systems. It connects field devices such as limit switches and solenoid valves to the controller. Therefore, it enables reliable digital control for manufacturing and process applications.

Physical and I/O Specifications

The GE A350-2900-T296/04 measures 22.0 cm in length and 16.0 cm in width. Moreover, its board weight equals approximately 0.48 kg for rack mounting. A single 64-pin male connector links this board to the system backplane. Additionally, the board integrates sixteen input and sixteen output channels.

Parameter	Specification
Brand	General Electric (GE)
Full Model	A350-2900-T296/04
Category	CIRCUIT BOARD (Digital I/O)
Dimensions (L x W)	22.0 cm x 16.0 cm (8.66″ x 6.30″)
Board Weight	0.48 kg (1.06 lbs)
Primary Interface	1 x 64-pin Male Connector
Field Wiring Points	32 Screw Terminal Blocks
Digital Input Channels	16 Channels (24 VDC, Sink/Source)
Digital Output Channels	16 Channels (Transistor, NPN Sinking)
Input Voltage Range	0 to 30 VDC
Input On-State Voltage	> 15 VDC
Input Off-State Voltage	< 5 VDC
Input Impedance	4.7 kΩ
Input Response Time	3 ms (Typical)
Output Voltage Range	12 to 24 VDC
Output Current per Channel	0.5 A (Continuous), 0.8 A (Peak)
Total Output Current	5.0 A Maximum (All Channels Combined)
Output On-State Drop	< 1.2 VDC at 0.5 A
Output Off-State Leakage	< 0.1 mA at 24 VDC
Output Protection	Short Circuit + Overtemperature
Output Response Time	0.5 ms Maximum
On-Board Components	16 Input Optocouplers + 16 Output Transistors + 16 Flyback Diodes + 2 Current Sense ICs + 8 Protection Diodes + 1 Voltage Regulator + 1 EMI Filter + 1 LED Driver IC
Energy Storage	3 x 100 µF Electrolytic Capacitors (35V) + 3 x 10 µF Tantalum (25V)
Operating Voltage	+5 VDC and +24 VDC from Backplane
Isolation Rating	1500 Vrms (Field to Backplane)
Operating Temperature	0°C to +55°C (32°F to 131°F)
Storage Temperature	-25°C to +85°C (-13°F to 185°F)
Status Indicators	16 Green LEDs (Input Status) + 16 Green LEDs (Output Status) + 1 Green LED (Power) + 1 Red LED (Fault) + 1 Green LED (24V OK)

Digital Input Features and Signal Processing

The GE A350-2900-T296/04 accepts sixteen discrete input signals at 24 VDC. Specifically, each input includes an optocoupler for complete electrical isolation. In addition, the input impedance of 4.7 kΩ suits standard industrial sensors. Moreover, all input channels respond within 3 milliseconds to signal changes. Consequently, this board captures fast field events for machine control logic.

Digital Output Features and Protection Systems

Sixteen transistor outputs provide NPN sinking capability for actuator control. For instance, each output delivers 0.5 amp continuously at 24 VDC. In addition, internal flyback diodes protect the transistors when driving inductive loads. Furthermore, short circuit protection shuts down any faulty channel automatically. Moreover, current sensing ICs monitor total load across all output channels. Thus, this board survives wiring mistakes without permanent damage.

Energy Storage and Operational Stability

This circuit board stores energy using six onboard capacitors for power filtering. Specifically, three electrolytic capacitors smooth the 24 VDC supply for stable optocoupler operation. In addition, three tantalum capacitors provide high-frequency noise suppression for logic circuits. Furthermore, these capacitors maintain I/O status during brief power interruptions. Therefore, the GE A350-2900-T296/04 continues operating through minor supply dips reliably.

Installation and Diagnostic Indicators

Thirty-five LED indicators provide operational status at a glance on this board. First, a green Power LED lights when the 5 VDC backplane supply is present. Second, a green 24V OK LED indicates external load supply voltage is present. Third, sixteen green Input Status LEDs light when each corresponding input receives an active signal. Fourth, sixteen green Output Status LEDs illuminate when each output channel turns on. Finally, a red Fault LED signals overtemperature or overcurrent conditions. Additionally, the board features six mounting holes for secure rack attachment. Thus, you can diagnose system status instantly without external tools.