GE A06B-6058-H223 AC Servo Drive | 5.5 kW, 22 A, 6600 µF

This AC servo drive unit controls spindle motors with precise speed regulation. It receives command signals directly from the CNC controller. You can use this drive for milling, turning, or heavy-duty cutting applications. The unit delivers consistent torque across a wide speed range.

Technical Specifications & Key Parameters

Parameter	Detail
Product Model	GE A06B-6058-H223
Category	AC Servo Drive Unit
Dimensions (H x W x D)	260 mm x 150 mm x 200 mm
Weight	6.8 kg (15.0 lbs)
Input Voltage	200–230 V AC, 3-phase, 50/60 Hz
Rated Output Current	22 A continuous, 45 A peak
Rated Power	5.5 kW continuous
Energy Storage	Two 3300 µF DC bus capacitors (total 6600 µF)
Cooling Method	Built-in fan with forced air circulation
Communication Interface	Serial encoder port (20-pin) and CNC interface (50-pin)
Protection Features	Overcurrent, overvoltage, and overtemperature
Control Method	Sinusoidal PWM with vector control

Detailed Feature Overview

GE A06B-6058-H223 provides 5.5 kW of continuous power for spindle control. This drive delivers 22 A continuously and 45 A during acceleration. Two large 3300 µF capacitors store 6600 µF of total energy. These capacitors maintain DC bus stability during load transients. Consequently, the drive handles rapid speed changes without voltage sag.

The unit uses sinusoidal PWM for smooth motor rotation at low speeds. A built-in fan keeps internal components below safe temperature limits. The drive accepts 200–230 V AC three-phase input power. You can connect a serial encoder for precise position feedback.

Protection and Reliability Features

This drive includes multiple protection circuits for safe operation. It shuts down automatically during overcurrent or overvoltage events. An overtemperature sensor triggers a fault if cooling fails. Diagnostic LEDs on the front panel show fault codes clearly. Moreover, the drive recovers quickly after correcting the error condition.

Installation and Physical Requirements

The unit weighs 6.8 kg, requiring sturdy mounting plates. Four M6 bolts secure the drive to the cabinet back panel. Maintain 100 mm clearance above and below for proper airflow. Ambient temperature must stay between 0°C and 40°C. Keep humidity below 90% without condensation for reliable operation.