Fuji FSB080A Terminal Block | MICREX-SX 8-Point Screw Type

Reliable Field Wiring Connection for I/O Modules

This terminal block provides secure wiring between field devices and your PLC. The Fuji FSB080A connects directly to MICREX-SX I/O modules without extra cables. It features eight screw-type terminals for digital or analog signals. A transparent cover protects connections from dust and accidental contact. Consequently, this accessory simplifies panel wiring and maintenance procedures.

Physical Design & Connection Specifications

The Fuji FSB080A mounts directly onto the front of compatible I/O modules. You can wire field sensors and actuators using standard stranded or solid wire. Each terminal accepts wire sizes from 0.2 mm² up to 2.5 mm². A strain relief mechanism prevents cable pull-out from vibration. Therefore, this terminal block ensures reliable signal transmission in industrial environments.

Parameter	Detailed Specification
Operating Temperature	-20°C to +70°C
Storage Temperature	-40°C to +85°C
Humidity Range	20% to 95% RH (no condensation)
Number of Terminals	8 screw-type contacts
Wire Range (Solid)	0.2 mm² to 2.5 mm² (24 AWG to 14 AWG)
Wire Range (Stranded)	0.2 mm² to 2.5 mm² with ferrule
Stripping Length	7 mm to 8 mm
Rated Voltage	250V AC / 30V DC
Rated Current	10A per terminal
Screw Type	M3 (slotted/Phillips combo)
Tightening Torque	0.5 Nm to 0.6 Nm
Protection Class	IP20 (with cover closed)
Housing Material	Polyamide (UL94 V-0)
Color	Light gray (standard)
Energy Storage	None (passive component)

Installation & Wiring Procedure

You snap the Fuji FSB080A directly onto your MICREX-SX I/O module front. The terminal block locks securely with integrated retaining clips. You then strip each wire to the correct length of 7 to 8 millimeters. Insert every wire into its designated terminal slot and tighten the screw. Finally, close the transparent cover to protect against dust and accidental touches.

Compatibility & Operational Advantages

The Fuji FSB080A works with most MICREX-SX digital and analog I/O modules. You can replace individual wires without removing the entire terminal block. The transparent cover allows visual inspection of wire connections at a glance. Screw terminals provide vibration-resistant connections for factory floor installations. Therefore, this Fuji terminal block reduces maintenance time during troubleshooting.