Cable Length and Physical Construction
The 51303627-003 shielded data cable assembly connects Honeywell DCS modules to field termination panels. Its overall length measures 3 m and weighs approximately 1.1 kg. The cable carries 22 AWG conductors in twisted-pair formation inside a foil shield. Consequently, the assembly resists electromagnetic interference along cable trays and panel interiors. A drain wire runs the full length and terminates at both connector shells.
Connector Interface and Signal Capacity
The 51303627-003 terminates in molded 25-pin D-sub connectors at both ends. Twelve twisted pairs carry analog and discrete signals plus ground returns. The foil shield plus drain wire blocks noise from nearby drives and relays. Moreover, each connector shell includes a strain relief boot for cable protection. The assembly tolerates a minimum bend radius of 45 mm during routing.
| Parameter | Value |
|---|---|
| Cable Length | 3 m |
| Weight | 1.1 kg |
| Conductor Size | 22 AWG |
| Connector Type | 25-pin D-sub, both ends |
| Conductor Pairs | 12 twisted pairs |
| Shield | Foil plus drain wire |
| Min Bend Radius | 45 mm |
| Strain Relief | Molded boot |
Component Count and Energy Storage
The 51303627-003 carries no active components, since it serves as a passive signal path. For energy storage, two 0.01 µF feed-through capacitors sit inside each connector shell. These capacitors filter high-frequency noise before it reaches module inputs. Operating temperature spans −20 °C to +80 °C across industrial installations.
MeloAuto-Trusted PLC & DCS Parts Supplier















WeChat
Scan the QR Code with wechat