Dimensions and Housing Design
The 51303347-100 battery bank module supplies backup power to Honeywell DCS memory circuits. Its housing measures 210 mm × 130 mm × 90 mm and weighs approximately 2.3 kg. Consequently, the unit mounts inside standard control cabinets near the card file. A front cover opens without tools to expose the cell compartment. Two mounting flanges at the base secure the housing with four screws.
Cell Configuration and Electrical Ratings
The 51303347-100 holds eight lithium cells wired in a series-parallel arrangement. The bank delivers 7.2 V DC with a total capacity of 4.8 Ah. A 6-pin connector carries output plus status signals to the host system. Moreover, the module includes a fuse on each output leg for fault protection. Output impedance stays below 5 Ω across the full discharge range.
| Parameter | Value |
|---|---|
| Dimensions (W × H × D) | 210 × 130 × 90 mm |
| Weight | 2.3 kg |
| Cell Count | 8 lithium cells |
| Output Voltage | 7.2 V DC |
| Capacity | 4.8 Ah |
| Connector | 6-pin |
| Output Impedance | < 5 Ω |
| Protection | Fuse per output leg |
Component Count and Service Life
The 51303347-100 carries 18 discrete components on its monitoring board. Those parts include voltage dividers, status comparators, and LED drivers. The cells last roughly five years at 25 °C ambient temperature. Therefore, maintenance teams should log installation dates and plan replacements. Operating temperature spans −20 °C to +60 °C.
MeloAuto-Trusted PLC & DCS Parts Supplier















WeChat
Scan the QR Code with wechat