GE IC697PWR711J Power Supply Module

Engineered for GE Series 90-70 PLC Systems

This module supplies stable DC power to the entire Series 90-70 rack. It provides reliable energy for the GE IC697PWR711J unit. You will find this power supply in large PLC configurations. Unlike smaller PSUs, this version delivers 100 watts of continuous output. It powers the CPU, I/O modules, and specialty cards in the rack.

Technical Specifications & Physical Dimensions

We designed this power supply for demanding industrial control applications. The table below presents all verified technical specifications.

Parameter	Specification
Physical Dimensions (W x H x D)	330mm x 150mm x 110mm
Total Weight	2.1 kg (2100 grams)
Input Voltage Range	85-264V AC or 100-300V DC
Input Frequency	47-63 Hz (auto-sensing)
Output Power	100 Watts maximum
Output Voltages	5V DC at 20A, 24V DC at 2A
Hold-up Time	20 milliseconds minimum

Functional Architecture and Protection Features

This power supply connects to the Series 90-70 backplane via a DIN connector. It uses a switching mode design for high efficiency. You can apply AC or DC input power without configuration changes. Moreover, the unit includes overvoltage and overcurrent protection on all outputs. These components shut down the supply during fault conditions. Consequently, the module protects expensive rack components from damage.

Installation and Operational Guidelines

The GE IC697PWR711J achieves 85% efficiency at full load. It requires 50mm clearance on all sides for proper ventilation. You must install the module in the leftmost slot of the rack. Always use a dedicated circuit breaker rated for 10 Amps. This practice protects the input wiring from overload damage. Furthermore, the unit includes a green LED for output status indication. This feature provides immediate visual confirmation of proper operation.

Physical Characteristics and Environmental Limits

This power supply has a rugged, ventilated metal enclosure with captive screws. Its substantial 2.1 kg weight reflects the heavy-duty transformer and heat sink design. The layout follows GE standard Series 90-70 specifications. Therefore, it fits securely into any Series 90-70 rack. The unit requires one rack slot width for installation. In addition, it maintains stable operation between 0°C and 55°C ambient temperature. You can store this PSU safely between -40°C and 85°C