GE IC660TSS100 Terminal Assembly

The GE IC660TSS100 provides screw terminal connections for Genius I/O blocks. This terminal assembly measures 165 mm in height and 75 mm in width. It has a depth of 50 mm, so it mounts directly on DIN rails. The unit weighs 0.35 kg, making installation quick and straightforward.

Terminal Configuration and Wiring Capacity

This terminal assembly features 20 screw terminals arranged in a single row. The GE IC660TSS100 accepts wire gauges from 26 AWG up to 14 AWG. Each terminal accommodates one solid or stranded copper wire securely. The assembly includes numbered positions matching each I/O channel address. A built-in strain relief bar secures cables against vibration loosening.

Connection to Genius I/O Modules

You plug this terminal assembly directly into the bottom of Genius I/O blocks. The GE IC660TSS100 mates with a 20-pin header on the I/O module. Gold-plated contacts ensure reliable signal transmission over many insertion cycles. Two locking screws prevent accidental disconnection from vibration or movement. The assembly supports both analog and digital I/O module types.

Internal Design and Component Layout

The terminal assembly contains a single circuit board inside its plastic housing. The GE IC660TSS100 uses direct PCB traces between terminals and mating pins. No active components or energy storage exist inside this device. The assembly stores no capacitance, inductance, or battery for any function. A labeling strip on the cover allows custom channel identification.

Environmental Specifications and Mounting Details

You can mount and remove this assembly without any special tools. The GE IC660TSS100 operates reliably from -20°C to 70°C ambient temperature. It tolerates humidity levels up to 95 percent without any condensation issues. The assembly has an IP20 rating for indoor cabinet installation. The hinged cover provides additional protection against dust and debris.

Below is a complete summary of its technical specifications.

Parameter	Value
Dimensions (H x W x D)	165 mm x 75 mm x 50 mm
Weight	0.35 kg
Number of Terminals	20
Terminal Arrangement	Single row
Wire Gauge Range	26 AWG to 14 AWG
Wire Type	Solid or stranded copper
Cable Strain Relief	Yes (built-in bar)
Mating Header	20-pin on I/O module
Contact Plating	Gold
Locking Mechanism	2 screws
Number of PC Boards	1
Internal Capacitance	None
Labeling Strip	Yes
Cover Type	Hinged protective
Enclosure Rating	IP20
Operating Temperature	-20°C to 70°C
Humidity Tolerance	95% non-condensing

The GE IC660TSS100 replaces older terminal assemblies in Genius I/O systems. You do not need any special tools for installation or removal. This assembly also supports rewiring without powering down the entire cabinet. Consequently, it simplifies field wiring changes for maintenance and upgrades.