MeloAuto-Trusted PLC & DCS Parts Supplier
The GE IC610CBL101A connects I/O expander blocks to Genius bus controllers. This shielded cable transmits power and communication signals between distributed components. Therefore, it enables remote I/O placement up to 30 meters from the main controller.
Product Overview
We designed this expander cable for reliable data transfer in industrial environments. Its heavy-duty construction resists oil, chemicals, and mechanical stress. Moreover, this unit includes a braided shield for noise immunity in electrically noisy areas.
Technical Specifications
| Parameter | Specification |
|---|---|
| Length | 1.0 meter (approximately 3.3 feet) |
| Weight | 0.12 kg (approximately 0.26 lb) |
| Interface Type | M23 circular connectors at both ends |
| Component Count | 12 conductors plus overall shield |
| Energy Storage | No energy storage components |
| Conductor Gauge | 22 AWG stranded copper |
| Conductor Count | 12 individually insulated wires |
| Shielding | Braided copper with 90% coverage |
| Connector Type | M23, 12-pin, IP67 rated |
| Voltage Rating | 250V AC/DC maximum |
| Current Rating | 4A per conductor maximum |
| Temperature Range | -25°C to +80°C operating |
| Cable Jacket | PVC compound, oil-resistant |
Cable Construction
The GE IC610CBL101A uses 12 stranded copper conductors for flexibility. Its braided copper shield covers 90% of the internal wire bundle. Additionally, a drain wire connects to the connector shells at both ends. You get excellent noise rejection for both power and signal lines.
Energy Storage Note
This expander cable contains no capacitors or energy storage components. All conductors pass signals directly from one connector to the other. Therefore, you can handle this cable without any discharge precautions. However, always disconnect power before connecting or disconnecting the cable. The connected I/O blocks may retain stored energy in their circuits.
Pinout Assignment
Pins 1 and 2 carry +24V DC power to the expander block.The pinout matches standard GE I/O expander blocks exclusively.
Installation Steps
Disconnect power from both the controller and expander block before installation. Align the red dot on each connector with the mating connector’s dot. Push the connector straight in until you feel the coupling ring engage. Turn the coupling ring clockwise until it clicks securely. Then tighten the ring with your fingers only, no tools required.
Cable Management
Secure the cable away from AC power lines and variable frequency drive cables. Maintain a separation distance of at least 15 cm from high-voltage wiring. Use cable ties every 30 cm to support long runs through the control cabinet. Avoid sharp bends that may damage the internal conductors. The minimum bend radius equals 6 times the cable diameter.
Extender Limitations
This cable length measures exactly 1.0 meter for standard applications. You cannot connect multiple cables together for extended length. For longer distances, use the GE IC610CBL102A 2-meter version. Exceeding the recommended length may cause communication errors. The bus timing depends on maximum cable length to all connected devices.
Environmental Protection
The M23 connectors carry an IP67 rating for dust and water resistance. You can install this cable in washdown areas without additional protection. The molded connector backshells prevent moisture ingress at the cable entry. The PVC jacket resists oils, coolants, and mild acids commonly found in factories.
Application Scope
This expander cable suits Genius I/O systems requiring remote block placement. Many factories use the GE IC610CBL101A to connect expansion I/O racks. Its 1-meter length suits most cabinet layouts without excess service loop.