GE IC200PWR102B | Power Supply

This power supply provides DC power to VersaMax I/O and CPU modules. It converts incoming AC line voltage into stable outputs for the backplane. The unit mounts on the left side of a VersaMax carrier.

Technical specifications

Parameter	Specification
Brand	GE Intelligent Platforms
Model	GE IC200PWR102B
Product Family	VersaMax
Category	Power Supply Module
Input Voltage	120/240V AC (selectable)
Input Frequency	47 to 63 Hz
Input Current	0.5A at 120V AC, 0.25A at 240V AC
Output Voltage 1	+5V DC (nominal)
Output Current 1	2.0A continuous from +5V rail
Output Voltage 2	+24V DC (nominal)
Output Current 2	0.5A continuous from +24V rail
Total Output Power	20 Watts maximum
Hold-up Time	10 ms at full load
Efficiency	Approximately 80%
Overvoltage Protection	Yes
Short Circuit Protection	Yes (auto-recovery)
Number of Components	1 PCB, 1 transformer, 4 capacitors
Energy Storage	2 x electrolytic capacitors (primary)
Dimensions (L x W x H)	Approx. 11 cm x 7 cm x 6 cm
Weight	Approx. 0.45 kg
Operating Temperature	0°C to 60°C
Cooling	Convection (no fan)

Detailed Technical Analysis

This power supply accepts either 120V or 240V AC input voltage. You select the correct voltage using a slide switch on the side. The unit then produces a regulated +5V DC output at 2 amps. It also provides a +24V DC rail at 0.5 amp for field power.

Now let us examine its output characteristics. The GE IC200PWR102B delivers 20 watts of total output power. The +5V rail powers logic circuits in the CPU and I/O modules. The isolated +24V rail supplies field devices and sensor power. The unit achieves approximately 80% efficiency under normal load.

The power supply uses convection cooling without any internal fan. This design eliminates fan noise and maintenance requirements. The GE IC200PWR102B weighs 0.45 kilograms and has a compact form factor. Two electrolytic capacitors store energy for 10 milliseconds of hold-up time.

Installation and Wiring Guidelines

You mount this power supply on the left end of a VersaMax carrier. Connect the AC input wires to the terminal block on the front. Use 14 AWG or larger wire for the AC supply connection. The GE IC200PWR102B automatically distributes +5V and +24V to the backplane.

For safety, connect a proper earth ground to the grounding terminal. Do not exceed the maximum output current on either rail. The unit includes auto-recovery short circuit protection. Simply remove the fault and the supply restarts automatically.

Practical Applications

Engineers use this power supply for small VersaMax I/O systems. For example, a carrier with one CPU and four I/O modules needs 20 watts. The GE IC200PWR102B also powers standalone VersaMax remote racks. Its convection cooling suits clean industrial control cabinets.

Summary

To conclude, this power supply delivers 20 watts with +5V and +24V outputs. It weighs 0.45 kilograms and includes short circuit protection. Choose GE IC200PWR102B for reliable VersaMax system power.