GE DS200TBCBG1A DS200TBCBG1AAA Termination Analog Card

Key Technical Specifications

This GE DS200TBCBG1A DS200TBCBG1AAA card operates from a 24V DC power supply. It terminates 16 analog input signals for turbine control systems. The unit measures 22 cm in length, 17 cm in width, and 4.5 cm in height. Its total weight reaches 0.7 kg without any packaging materials.

The GE DS200TBCBG1A DS200TBCBG1AAA includes 16 differential analog input channels with filtering. Additionally, it features one 50-pin ribbon connector for host interface. A single 6-pin terminal block connects the DC power input. The card contains 16 analog conditioners, 1 FPGA, 8 voltage regulators, 24 resistors, and 18 capacitors.

GE DS200TBCBG1A DS200TBCBG1AAA stores energy using one electrolytic capacitor. This capacitor provides 100 µF at 35V rating for input filtering. Consequently, the card maintains stable readings during 20 millisecond power fluctuations. Therefore, measurement accuracy remains high in noisy industrial environments.

Design and Integration

Both the GE DS200TBCBG1A and DS200TBCBG1AAA versions share identical termination circuitry. These cards use four-layer PCB construction with guarded analog traces for noise rejection. Consequently, the GE DS200TBCBG1A DS200TBCBG1AAA operates reliably from -10°C to +55°C ambient temperature.

For installation, you need M3 screws for the four mounting holes. The card draws 150 mA typical current from the 24V DC supply. Each input channel provides software selectable gain and filtering. We recommend using shielded twisted-pair cables for all sensor connections.

Practical Application

This termination analog card connects field sensors to a turbine control system. It terminates signals from thermocouples, RTDs, and pressure transmitters. The GE DS200TBCBG1A DS200TBCBG1AAA then routes conditioned analog signals to the host controller. Therefore, it serves as an analog front-end for GE turbine control systems.