GE DS200SLCCG2A DS200SLCCG2AHH | Communication Board

The GE DS200SLCCG2A DS200SLCCG2AHH belongs to the Mark V series. General Electric designed this board as a serial communication unit. This component handles data exchange between control devices. It also translates protocols for the main processor.

Technical Specifications

The table below lists all key parameters for the GE DS200SLCCG2A DS200SLCCG2AHH.

Parameter	Specification
Manufacturer	General Electric (GE)
Full Model	DS200SLCCG2A / DS200SLCCG2AHH
Product Type	Serial Communication Board
Series	Mark V
Width	10.0 inches (25.4 cm)
Height	7.0 inches (17.8 cm)
Weight	1.0 lb (0.45 kg)
Component Count	Over 135 surface-mount devices
Main Interface	One 64-pin male DIN connector
Communication Ports	Three RS-232/485 serial ports
Baud Rate Range	300 to 115200 bps
Protocol Support	SNP, Modbus, proprietary GE
Energy Storage	Ceramic and tantalum capacitors
Status Indicators	Four LEDs (power, TX, RX, fault)

Communication Features

The GE DS200SLCCG2A DS200SLCCG2AHH uses a rugged four-layer PCB. Over 135 resistors, capacitors, and line drivers process serial signals. A single 64-pin DIN connector links this board to the backplane. Consequently, data packets move quickly to the main processor. Four onboard LEDs show power, transmit, receive, and fault status. Moreover, tantalum capacitors provide stable energy for communication chips.

Port and Protocol Capabilities

You get three serial ports on this communication board. Each port supports both RS-232 and RS-485 standards. The GE DS200SLCCG2A DS200SLCCG2AHH operates at baud rates from 300 to 115200 bps. This board handles SNP, Modbus, and proprietary GE protocols. Therefore, it connects easily to existing automation networks.

Power and Energy Storage

You must install this board inside a protected Mark V cabinet. The backplane supplies 5 VDC to the GE DS200SLCCG2A DS200SLCCG2AHH. Ceramic capacitors filter high-frequency noise on power lines. Tantalum capacitors store energy for stable voltage regulation. As a result, the board delivers reliable serial communication consistently.

Mechanical Layout

This communication board measures exactly 25.4 cm in width. Its height reaches 17.8 cm. The total weight equals just 0.45 kg. As a result, this board saves valuable rack space. The lightweight design also reduces stress on the backplane connector. Always handle this communication board by its edges. This precaution prevents electrostatic discharge damage.

Installation Context

This board works alongside other Mark V I/O and processor cards. Its compact size allows easy placement near network cables. The robust design handles continuous industrial communication. Choose the GE DS200SLCCG2A DS200SLCCG2AHH for your turbine serial network needs.