GE DS200SDCCG1A DS200SDCCG1AHD | Drive Control Board

The GE DS200SDCCG1A DS200SDCCG1AHD belongs to the Mark V series. General Electric designed this board as a drive control unit. This component manages motor speed and torque signals. It also processes feedback from connected sensors.

Technical Specifications

The table below lists all key parameters for the GE DS200SDCCG1A DS200SDCCG1AHD.

Parameter	Specification
Manufacturer	General Electric (GE)
Full Model	DS200SDCCG1A / DS200SDCCG1AHD
Product Type	Drive Control Board
Series	Mark V
Width	10.0 inches (25.4 cm)
Height	7.0 inches (17.8 cm)
Weight	1.0 lb (0.45 kg)
Component Count	Over 160 surface-mount devices
Main Interface	One 64-pin male DIN connector
PWM Outputs	6 channels for IGBT control
Analog Inputs	8 differential 14-bit channels
Encoder Inputs	2 quadrature encoder interfaces
Energy Storage	Ceramic and tantalum capacitors
Status Indicators	Three LEDs (power, run, fault)

Drive Control Features

The GE DS200SDCCG1A DS200SDCCG1AHD uses a rugged four-layer PCB. Over 160 resistors, capacitors, and logic gates process drive signals. A single 64-pin DIN connector links this board to the backplane. Consequently, motor commands reach the IGBT driver instantly. Three onboard LEDs show power, run, and fault status. Moreover, tantalum capacitors provide stable energy for analog feedback circuits.

Output and Input Capabilities

You get six PWM output channels on this drive control board. These channels control IGBT gates for motor drive. The GE DS200SDCCG1A DS200SDCCG1AHD provides eight differential analog inputs with 14-bit resolution. Two quadrature encoder interfaces read motor position and speed. Therefore, this board delivers precise motor control for industrial applications.

Power and Energy Storage

You must install this board inside a protected Mark V cabinet. The backplane supplies 5 VDC and 24 VDC to the GE DS200SDCCG1A DS200SDCCG1AHD. Ceramic capacitors filter high-frequency noise on power lines. Tantalum capacitors store energy for stable analog references. As a result, the board delivers accurate drive control consistently.

Mechanical Layout

This drive control board measures exactly 25.4 cm in width. Its height reaches 17.8 cm. The total weight equals just 0.45 kg. As a result, this board saves valuable rack space. The lightweight design also reduces stress on the backplane connector. Always handle this drive board by its edges. This precaution prevents electrostatic discharge damage.

Installation Context

This board works alongside other Mark V I/O and power supply cards. Its compact size allows easy placement near the main controller. The robust design handles continuous industrial operation. Choose the GE DS200SDCCG1A DS200SDCCG1AHD for your turbine drive control system.