MeloAuto-Trusted PLC & DCS Parts Supplier
The GE DS200SLCCG1A DS200SLCCG1AEF DS215SLCCG1AZZ01A Speedtronic PC communication board connects Mark V systems to external computers. This board handles all data exchange between the turbine controller and plant networks. You will find this communication board in Speedtronic Mark V control cabinets. Its dedicated processor ensures reliable network performance.
Network Communication Architecture
This communication board uses a specialized network processor for protocol conversion. Consequently, it manages all TCP/IP traffic without burdening the main CPU. The GE DS200SLCCG1A DS200SLCCG1AEF DS215SLCCG1AZZ01A provides two independent Ethernet ports for redundancy. Moreover, four status LEDs indicate power, link, activity, and fault conditions. You can monitor network health directly from the board.
Technical Specifications
| Parameter | Value |
|---|---|
| Input Voltage | 24V DC ±10% |
| Power Consumption | 10W typical |
| Ethernet Ports | 2 (RJ45, 10/100 Mbps auto-sensing) |
| Supported Protocols | TCP/IP, Modbus TCP, GE SRTP, Ethernet/IP |
| Processor Type | 32-bit ARM, 100 MHz |
| Memory | 8 MB SDRAM, 2 MB Flash |
| Dimensions | 200mm x 140mm x 25mm |
| Weight | 0.48 kg (1.06 lbs) |
| PCB Layers | 6 |
| Onboard Components | 1 processor, 2 Ethernet controllers, 4 memory chips |
| Connector Count | 3 (Ethernet x2, power/backplane) |
| Status Indicators | 4 LEDs (power, link, activity, fault) |
| Energy Storage | 1000 µF (power filtering capacitance) |
| Isolation Voltage | 1500V (Ethernet ports to logic) |
| Operating Temperature | 0°C to +50°C |
| Storage Temperature | -20°C to +70°C |
Dual Port Connectivity and Isolation
The unit includes two auto-sensing Ethernet ports for network redundancy. Therefore, you can create a fault-tolerant communication link to the plant. This board replaces the DS200SLCCG1AEF and DS215SLCCG1AZZ01A versions without changes. Simply remove the old board and install this one. GE designed this communication board for hot-swappable installation. Hence, you can replace it without shutting down the turbine.
Six PCB layers separate high-speed Ethernet traces from power circuits. Three connectors handle all network and backplane signals. The GE DS200SLCCG1A DS200SLCCG1AEF DS215SLCCG1AZZ01A holds 1000 µF of capacitance for stable operation. Accordingly, it maintains network connectivity during minor power fluctuations. Four status LEDs provide complete operational feedback at a glance.
Protocol Support and Installation Guide
The board supports multiple industrial protocols for broad compatibility. You can connect this board to PLCs, SCADA systems, and HMIs. The GE DS200SLCCG1A DS200SLCCG1AEF DS215SLCCG1AZZ01A works with all GE Speedtronic Mark V systems. Always use shielded Cat5e or Cat6 cable for Ethernet connections. Proper grounding of cable shields ensures noise-free communication.
The onboard processor handles all protocol conversions automatically. A loss of network connection does not affect turbine control functions. The GE DS200SLCCG1A DS200SLCCG1AEF DS215SLCCG1AZZ01A delivers reliable PC communication for turbine data logging. Installation requires only a screwdriver for backplane connection. This board operates in non-condensing environments with adequate ventilation.