MeloAuto-Trusted PLC & DCS Parts Supplier
The GE DS200PCCAG10A DS200PCCAG10ACB DC power connect board distributes regulated power within Mark V systems. This board converts high-voltage DC input into multiple low-voltage outputs. You will find this power connect board in main control cabinets and I/O racks. Its robust design supports continuous industrial operation.
Power Distribution Architecture
This power connect board uses switching regulators for high efficiency. Consequently, it generates minimal heat during normal operation. The GE DS200PCCAG10A DS200PCCAG10ACB provides three independent output voltage rails. Moreover, each output includes overcurrent protection and status monitoring. You can rely on this board for critical system power distribution.
Technical Specifications
| Parameter | Value |
|---|---|
| Input Voltage | 125V DC ±20% |
| Output Voltages | +24V DC (8A), +5V DC (10A), +15V DC (3A) |
| Total Output Power | 250W maximum |
| Efficiency | 88% typical at full load |
| Output Ripple | <50 mV (24V), <20 mV (5V), <30 mV (15V) |
| Dimensions | 240mm x 180mm x 40mm |
| Weight | 1.05 kg (2.31 lbs) |
| PCB Layers | 6 |
| Onboard Components | 3 switching regulators, 12 capacitors, 6 diodes, 2 heatsinks |
| Connector Count | 4 (input, 3 output headers) |
| Status Indicators | 3 LEDs (24V OK, 5V OK, 15V OK) |
| Energy Storage | 8200 µF (bulk input capacitance) |
| Hold-up Time | 15 ms at full load |
| Switching Frequency | 100 kHz per regulator |
| Operating Temperature | -10°C to +55°C |
| Storage Temperature | -25°C to +70°C |
| Protection Features | Overcurrent, overvoltage, short circuit, thermal |
Output Regulation and Energy Storage
The unit holds 8200 µF of bulk capacitance on its input stage. Therefore, it maintains output stability during input voltage dips. This board replaces the DS200PCCAG10ACB version without any mounting modifications. Simply remove the old board and install this one. GE designed this power board for single-slot installation. Hence, it fits directly into existing Mark V rack positions.
Six PCB layers separate high-voltage input from low-voltage output traces. Four connectors handle all input and output power signals. The GE DS200PCCAG10A DS200PCCAG10ACB includes independent regulation for each output channel. Accordingly, a short on one output does not affect the others. This feature prevents cascading power failures in the system.
Thermal Management and Protection
Two heatsinks provide passive cooling for the switching regulators. The board delivers 15 ms of hold-up time after input loss. The GE DS200PCCAG10A DS200PCCAG10ACB includes thermal shutdown protection at 85°C. Consequently, it prevents damage during overload or airflow blockage. Three status LEDs indicate each output’s condition clearly.
Always verify input polarity before connecting DC power. The board includes reverse polarity protection on the input. The GE DS200PCCAG10A DS200CCAG10ACB works with all GE Mark V control systems. Proper airflow around the heatsinks guarantees full rated output power. This board operates reliably in non-condensing environments only.