GE DS200LPPAG1A DS200LPPAG1ABA | Line Protection Board

The GE DS200LPPAG1A DS200LPPAG1ABA belongs to the Mark V series. General Electric designed this board as a line protection unit. This component monitors power line conditions continuously. It also detects overcurrent, overvoltage, and ground faults.

Technical Specifications

The table below lists all key parameters for the GE DS200LPPAG1A DS200LPPAG1ABA.

Parameter	Specification
Manufacturer	General Electric (GE)
Full Model	DS200LPPAG1A / DS200LPPAG1ABA
Product Type	Line Protection Board
Series	Mark V
Width	10.0 inches (25.4 cm)
Height	7.0 inches (17.8 cm)
Weight	1.0 lb (0.45 kg)
Component Count	Over 145 surface-mount devices
Main Interface	One 64-pin male DIN connector
Voltage Sensing Inputs	3 phase-to-ground channels
Current Sensing Inputs	3 CT channels
Overcurrent Threshold	1 to 10 A programmable
Overvoltage Threshold	100 to 600 V AC programmable
Response Time	Less than 5 milliseconds
Accuracy	±1% of setpoint
Energy Storage	Ceramic and film capacitors
Status Indicators	Four LEDs (power, fault A, fault B, trip)

Line Protection Features

The GE DS200LPPAG1A DS200LPPAG1ABA uses a rugged four-layer PCB. Over 145 resistors, comparators, and logic gates monitor line conditions. A single 64-pin DIN connector links this board to the backplane. Consequently, fault detection occurs within 5 milliseconds. Four onboard LEDs show power, two fault types, and trip status. Moreover, film capacitors provide stable energy for comparator reference voltages.

Sensing and Threshold Capabilities

You get three phase-to-ground voltage sensing inputs on this board. Three current transformer channels monitor line currents. The GE DS200LPPAG1A DS200LPPAG1ABA allows programmable overcurrent thresholds from 1 to 10 amps. Overvoltage thresholds adjust from 100 to 600 V AC. Detection accuracy reaches ±1% of each programmed setpoint. Therefore, this board protects equipment from various electrical faults.

Power and Energy Storage

You must install this board inside a protected Mark V cabinet. The backplane supplies 5 VDC and 24 VDC to the GE DS200LPPAG1A DS200LPPAG1ABA. Ceramic capacitors filter high-frequency noise on power lines. Film capacitors store energy for stable threshold references. As a result, the board delivers accurate fault detection consistently.

Mechanical Layout

This line protection board measures exactly 25.4 cm in width. Its height reaches 17.8 cm. The total weight equals just 0.45 kg. As a result, this board saves valuable rack space. The lightweight design also reduces stress on the backplane connector. Always handle this protection board by its edges. This precaution prevents electrostatic discharge damage.

Installation Context

This board works alongside other Mark V I/O and processor cards. Its compact size allows easy placement near power entry points. The robust design handles continuous industrial monitoring. Choose the GE DS200LPPAG1A DS200LPPAG1ABA for your line protection needs.