MeloAuto-Trusted PLC & DCS Parts Supplier
The GE DS200LDCCH1A DS200LDCCH1ANA LAN drive control card manages communication for GE Mark V drive systems. This board handles data exchange between the drive and external controllers. You will find this card in industrial motor control cabinets. Its compact PCB design saves valuable panel space.
Technical Specifications
| Parameter | Value |
|---|---|
| Input Voltage | 24V DC ±10% |
| Power Consumption | 15W typical |
| Dimensions | 180mm x 120mm x 25mm |
| Weight | 0.35 kg (0.77 lbs) |
| PCB Layers | 6 |
| Onboard Components | 1 processor, 4 memory chips, 2 interface controllers |
| LAN Ports | 2 (RJ45, 10/100 Mbps) |
| Status LEDs | 5 (power, link, activity, fault, ready) |
| Connector Count | 3 (power, I/O, diagnostic) |
| Energy Storage | 2200 µF (on-board capacitors) |
| Operating Temperature | 0°C to +50°C |
| Storage Temperature | -20°C to +70°C |
This LAN drive control card uses a dedicated communication processor. Consequently, it reduces the main controller’s processing load. The GE DS200LDCCH1A DS200LDCCH1ANA supports both TCP/IP and proprietary GE protocols. Moreover, five status LEDs provide clear operational feedback. You can monitor network activity directly from the board.
The card holds 2200 µF of capacitance for signal conditioning. Therefore, it maintains stable communication during minor power fluctuations. This unit replaces the DS200LDCCH1ANA version without any configuration changes. Simply swap the boards and power up the system. GE designed this card for hot-swappable installation. Hence, you can replace it without shutting down the entire drive cabinet.
Six PCB layers reduce electromagnetic interference between traces. Two RJ45 ports support daisy-chaining multiple drives. The GE DS200LDCCH1A DS200LDCCH1ANA also includes built-in surge protection on all communication lines. Accordingly, it withstands industrial electrical noise environments. Four memory chips store configuration data and fault logs. A loss of primary power does not erase these logs due to non-volatile storage.
This control card works exclusively with GE Mark V drive systems. For this reason, always verify system compatibility before purchasing. The compact 180x120mm footprint fits standard drive card slots. Installation requires only a screwdriver and basic electrical knowledge. The GE DS200LDCCH1A DS200LDCCH1ANA delivers reliable drive network communication.