GE DS200DPCAG1A DS200DPCAG1ADC Power Connect Board

The GE DS200DPCAG1A DS200DPCAG1ADC distributes control power to multiple downstream modules. This board accepts a single DC input and feeds six separate output channels. Therefore, it simplifies wiring inside the Mark V drive cabinet.

Product Overview

We designed this power connect board for maximum current handling with minimal voltage drop. Its heavy copper traces carry up to 15 amps continuously without overheating. Additionally, this unit replaces older GE boards with identical mounting holes.

Technical Specifications

Parameter	Specification
Dimensions	28.7 cm (length) x 13.3 cm (width)
Weight	0.52 kg (approximately 1.15 lb)
Interface Type	Single 50-pin connector plus six terminal blocks
Component Count	78 components including 12 current-sensing resistors
Energy Storage	3 electrolytic capacitors (470 µF each, 100V)
Input Voltage	24 V DC or 48 V DC field-selectable
Output Current	5 amps per channel, 15 amps total maximum

Circuit Layout & Protection Features

The GE DS200DPCAG1A DS200DPCAG1ADC uses separate ground planes for analog and digital returns. Its three storage capacitors absorb voltage spikes from inductive loads. Furthermore, each output channel includes a self-resetting polyfuse. You do not need to replace fuses after an overload condition clears.

Installation Procedure

Turn off the main breaker before you handle this power board. Align the GE DS200DPCAG1A DS200DPCAG1ADC with its guide rails in the rack. Push the board forward until the backplane connector locks into place. Then tighten the four corner screws to ensure proper grounding contact.

Operational Guidelines

Monitor the onboard LEDs for each channel’s status. A green light means normal operation, while red indicates a fault. Moreover, keep the ambient temperature below 55°C for optimal capacitor life. These capacitors store energy to ride through 20 ms power interruptions.

Replacement Scenarios

Many plants use the GE DS200DPCAG1A DS200DPCAG1ADC for upgrading older Mark V panels. This board also works as a spare for DS200DPCBG1A units. Its field-selectable voltage input adds flexibility for different plant DC bus ratings.