GE DS200DDTBG1A DS200DDTBG1ABB | LCI Aux I/O Terminal

The GE DS200DDTBG1A DS200DDTBG1ABB belongs to the Mark V series. General Electric designed this board as an LCI auxiliary terminal unit. This component connects field devices to the main control system. It also provides signal conditioning for analog and digital inputs.

Technical Specifications

The table below lists all key parameters for the GE DS200DDTBG1A DS200DDTBG1ABB.

Parameter	Specification
Manufacturer	General Electric (GE)
Full Model	DS200DDTBG1A / DS200DDTBG1ABB
Product Type	LCI Aux I/O Terminal Board
Series	Mark V
Width	10.0 inches (25.4 cm)
Height	7.0 inches (17.8 cm)
Weight	1.0 lb (0.45 kg)
Component Count	Over 130 surface-mount devices
Main Interface	One 64-pin male DIN connector
Terminal Blocks	40 screw-type positions
Analog Inputs	8 differential channels
Digital Inputs	16 optically isolated channels
Digital Outputs	8 open-collector channels
Energy Storage	Ceramic and tantalum capacitors
Status Indicators	Two LEDs (power and active)

Terminal Connectivity Features

The GE DS200DDTBG1A DS200DDTBG1ABB uses a rugged four-layer PCB. Over 130 resistors, capacitors, and optocouplers condition incoming signals. A single 64-pin DIN connector links this board to the backplane. Consequently, field signals reach the main processor accurately. Two onboard LEDs show power and active status. Moreover, tantalum capacitors provide stable energy for analog circuits.

Input and Output Capabilities

You get 40 screw-type terminal positions on this LCI auxiliary board. These terminals accept wires from field sensors and actuators. The GE DS200DDTBG1A DS200DDTBG1ABB provides eight differential analog inputs. Sixteen optically isolated digital inputs protect against voltage spikes. Eight open-collector digital outputs drive external relays. Therefore, this board handles diverse field devices effectively.

Power and Energy Storage

You must install this board inside a protected Mark V cabinet. The backplane supplies 5 VDC and 24 VDC to the GE DS200DDTBG1A DS200DDTBG1ABB. Ceramic capacitors filter high-frequency noise on power lines. Tantalum capacitors store energy for stable analog references. As a result, the board delivers accurate signal conditioning consistently.

Mechanical Layout

This LCI auxiliary terminal board measures exactly 25.4 cm in width. Its height reaches 17.8 cm. The total weight equals just 0.45 kg. As a result, this board saves valuable cabinet space. The lightweight design also reduces stress on the backplane connector. Always handle this terminal board by its edges. This precaution prevents electrostatic discharge damage.

Installation Context

This board works alongside other Mark V I/O and processor cards. Its screw terminals allow easy field wiring without special tools. The robust design handles continuous industrial operation. Choose the GE DS200DDTBG1A DS200DDTBG1ABB for your LCI auxiliary I/O needs.