GE DS200DCFBG1B DS200DCFBG1BLC Power Supply Board

This GE DS200DCFBG1B DS200DCFBG1BLC Power Supply Board provides regulated DC power for EX2000 excitation systems. The board accepts a wide input range from 85V to 265V AC or DC. You will find this component in many industrial generator control applications. The DS200DCFBG1BLC variant includes a locking connector for harsh vibration environments.

Technical Specifications

Parameter	Specification
Full Model	GE DS200DCFBG1B DS200DCFBG1BLC Power Supply Board
Category	Power Supply Board
Input Voltage	85V to 265V AC (47-63 Hz) or 100V to 300V DC
Output Voltages	+5V, +12V, -12V, +24V
Output Current	12A (+5V), 4A (+12V), 1.5A (-12V), 3A (+24V)
Dimensions (H x W)	250 mm x 140 mm
Weight	Approximately 1.05 kg
Connectors	2 x Terminal Blocks, 1 x 20-Pin Locking Header
Component Count	168 Discrete Components
Energy Storage	4 x 1200 µF Bulk Capacitors

Power Conversion and Regulation Features

The GE DS200DCFBG1B DS200DCFBG1BLC Power Supply Board uses a flyback converter topology. This design provides excellent line regulation across the entire input range. Each output has independent overcurrent protection with automatic recovery. Furthermore, the board achieves 88% typical efficiency at full load. As a result, it requires only passive cooling for reliable operation.

Installation and Connection Steps

Mount this GE DS200DCFBG1B DS200DCFBG1BLC Power Supply Board in any EX2000 cabinet slot. First, connect the AC or DC input to the TB1 terminals. After that, attach your load devices to the output terminals on TB2. Then, secure the locking header connector for the DS200DCFBG1BLC variant. Finally, verify each output voltage before connecting sensitive field circuits.

Energy Discharge and Safety Notice

This GE DS200DCFBG1B DS200DCFBG1BLC Power Supply Board stores significant energy in its capacitors. Therefore, you must wait at least two minutes after power removal. The four bulk capacitors discharge through internal bleeder resistors. Never short the output terminals to discharge the board faster.

Status Indication and Diagnostics

Four green LEDs show the presence of each output voltage clearly. A yellow LED indicates the board is in normal operating mode. A red fault LED illuminates when any output falls below 90% of nominal. These indicators help technicians diagnose power issues without any test equipment.