MeloAuto-Trusted PLC & DCS Parts Supplier
Engineered for Fanuc CNC System Power Distribution
This unit supplies regulated 24V DC power to CNC peripheral devices. It provides reliable energy for the GE A16B-1212-0100-01 unit. You will find this power supply in Fanuc Series 0, 15, and 18 control cabinets. Unlike multi-voltage units, this version focuses on high-current 24V output. It powers I/O modules, relays, sensors, and operator panels.
Technical Specifications & Physical Dimensions
We designed this power unit for heavy industrial loads. The table below presents all verified technical specifications.
| Parameter | Specification |
|---|---|
| Physical Dimensions (W x H x D) | 240mm x 170mm x 110mm |
| Total Weight | 2.9 kg (2900 grams) |
| Input Voltage Range | 200-240V AC (single phase) |
| Input Frequency | 50/60 Hz ±5% |
| Output Voltage | 24V DC nominal (22V – 26V) |
| Output Current | 6.5 Amps continuous |
| Output Power | 156 Watts maximum |
| Hold-up Time | 30 milliseconds minimum |
Functional Architecture and Protection Features
This power supply uses a switching mode design for high efficiency. It connects to the CNC rack or mounts on a DIN rail. You can parallel multiple units for higher current capacity. Moreover, the unit includes overvoltage, overcurrent, and overtemperature protection. These components shut down the supply during fault conditions. Consequently, the PSU protects sensitive CNC electronics from damage.
Installation and Operational Guidelines
The GE A16B-1212-0100-01 achieves 88% efficiency at full load. It requires 50mm clearance on all sides for ventilation. You must connect the input to a dedicated 15 Amp circuit breaker. Always use properly sized output cables for 6.5 Amp current. This practice prevents voltage drop to remote devices. Furthermore, the unit includes a green LED for output OK indication. This feature provides immediate visual confirmation of proper operation.
Physical Characteristics and Environmental Limits
This power unit has a rugged, ventilated metal enclosure with mounting flanges. Its substantial 2.9 kg weight reflects the heavy-duty components. The layout follows GE Fanuc standard power supply specifications. Therefore, it fits into CNC cabinets or separate electrical panels. The unit requires no rack slot for installation. In addition, it maintains stable operation between 0°C and 50°C ambient temperature. You can store this PSU safely between -20°C and 70°C.