FUJI NR1DW-16T65DT PLC Module | 16 DI 16 DO 24V Transistor

This PLC module provides discrete input and output capability for FUJI electric automation systems. It interfaces directly with field sensors and actuators for machine control. Therefore, it enables reliable industrial automation for manufacturing applications.

Physical and I/O Specifications

The FUJI NR1DW-16T65DT measures 14.0 cm in length and 10.5 cm in width. Moreover, its module weight equals approximately 0.45 kg for DIN rail mounting. A single 28-pin removable terminal block handles all field wiring connections. Additionally, this module contains sixteen input channels and sixteen output channels.

Parameter	Specification
Brand	FUJI Electric
Full Model	NR1DW-16T65DT
Category	PLC Module (Discrete I/O)
Dimensions (L x W x H)	14.0 cm x 10.5 cm x 6.5 cm (5.51″ x 4.13″ x 2.56″)
Module Weight	0.45 kg (0.99 lbs)
Primary Interface	1 x 28-pin Removable Screw Terminal Block
Backplane Interface	1 x 48-pin Male Connector (FUJI Rack)
Operating Voltage	24 VDC from Backplane (19.2 to 28.8 VDC)
Power Consumption	4.5 W (Typical)
Digital Input Channels	16 Channels (24 VDC, Sink/Source)
Input Voltage Range	0 to 30 VDC
Input On-State Voltage	> 15 VDC
Input Off-State Voltage	< 5 VDC
Input Impedance	4.7 kΩ
Input Response Time	4 ms (Typical)
Input Isolation	Optocoupler (1500 Vrms)
Digital Output Channels	16 Channels (Transistor, NPN Sinking)
Output Voltage Range	12 to 24 VDC
Output Current per Channel	0.5 A (Continuous), 0.8 A (Peak)
Total Output Current	5.0 A Maximum (All Channels Combined)
Output On-State Drop	< 1.2 VDC at 0.5 A
Output Off-State Leakage	< 0.1 mA at 24 VDC
Output Protection	Short Circuit + Overtemperature
Output Response Time	0.5 ms Maximum
On-Board Components	16 Input Optocouplers + 16 Output Transistors + 16 Flyback Diodes + 1 Microcontroller + 2 Current Sense ICs + 8 Protection Diodes + 1 Voltage Regulator + 1 Fuse
Energy Storage	3 x 220 µF Electrolytic Capacitors (35V) + 3 x 47 µF Tantalum (25V)
Isolation Rating	1500 Vrms (Field to Logic)
Operating Temperature	0°C to +55°C (32°F to 131°F)
Storage Temperature	-25°C to +85°C (-13°F to 185°F)
Mounting Type	DIN Rail or FUJI PLC Rack
Status Indicators	16 Green LEDs (Inputs) + 16 Green LEDs (Outputs) + 1 Green LED (Power) + 1 Red LED (Fault) + 1 Green LED (24V OK)

Input Channel Features and Signal Processing

The FUJI NR1DW-16T65DT accepts sixteen discrete input signals at 24 VDC. Specifically, each input includes an optocoupler for complete electrical isolation. In addition, the input impedance of 4.7 kΩ suits standard industrial sensors. Moreover, all input channels respond within 4 milliseconds to signal changes. Consequently, this module captures field events reliably for machine control.

Output Channel Features and Protection Systems

Sixteen transistor outputs provide NPN sinking capability for actuator control. For instance, each output delivers 0.5 amp continuously at 24 VDC. In addition, internal flyback diodes protect the transistors when driving inductive loads. Furthermore, short circuit protection shuts down any faulty channel automatically. Moreover, current sensing ICs monitor total load across all outputs. Thus, this module survives wiring mistakes without permanent damage.

Energy Storage and Operational Stability

This PLC module stores energy using six onboard capacitors for power filtering. Specifically, three electrolytic capacitors smooth the 24 VDC supply for stable operation. In addition, three tantalum capacitors provide high-frequency noise suppression for logic circuits. Furthermore, these capacitors maintain I/O status during brief power interruptions. Therefore, the FUJI NR1DW-16T65DT continues operating through minor supply dips reliably.

Installation and Diagnostic Indicators

Thirty-five LED indicators provide operational status at a glance on this module. First, sixteen green LEDs light when each corresponding input receives an active signal. Second, sixteen green LEDs illuminate when each output channel turns on. Third, a green Power LED indicates the presence of backplane operating voltage. Fourth, a green 24V OK LED shows external load supply voltage is present. Finally, a red Fault LED signals overtemperature or overcurrent conditions. Thus, you can diagnose system status instantly without external tools.