MeloAuto-Trusted PLC & DCS Parts Supplier
The 1SBP260110R1001 captures discrete field signals for ABB AC500 controllers. This module reads status from push buttons, limit switches, and proximity sensors. You can use it for machine monitoring and interlock applications.
Key Technical Parameters
The table below lists all essential technical specifications for this digital input module.
| Specification | Details |
|---|---|
| Part Number | 1SBP260110R1001 |
| Product Type | Digital Input Module |
| Compatibility | ABB AC500 series |
| Number of Channels | 16 digital inputs |
| Nominal Voltage | 24V DC |
| Input Voltage Range | 18V to 30V DC |
| Input Current | 5 mA per channel (typical) |
| Input Impedance | 4.7 kΩ |
| Isolation | Optocoupler (channel to bus) |
| Response Time | 1 ms typical |
| Dimensions (W x H x D) | 105 mm x 95 mm x 65 mm |
| Weight | Approx. 0.22 kg |
| Terminal Type | Removable screw connector |
| Power Supply | 5V DC from backplane |
| Current Consumption | 100 mA |
| Operating Temperature | -20°C to 60°C |
Physical Characteristics and Installation
This digital input module weighs approximately 0.22 kg for easy DIN rail mounting. Its dimensions measure 105 mm x 95 mm x 65 mm for standard AC500 footprint. First, clip the 1SBP260110R1001 onto a 35 mm DIN rail. Then, connect your sensors to the removable screw terminals. Finally, attach the module to the left-side bus connector. LED indicators on the front show the real-time status of every input channel.
Input Specifications and Signal Detection
The 1SBP260110R1001 provides 16 digital input channels for versatile field connectivity. Each channel accepts 24V DC nominal signals from industrial sensors. The module draws only 5 mA per channel for reliable detection. Input impedance measures 4.7 kΩ for proper signal loading. Optocouplers isolate every input from the internal backplane bus. Consequently, this design protects the controller from electrical noise.
Response Time and Power Requirements
This input module delivers a fast 1 ms response time for time-critical applications. Each channel responds within one millisecond to any signal change. The 1SBP260110R1001 draws its operating power from the 5V DC backplane supply. The total current consumption reaches 100 mA under full load. You do not need any external power source for the logic circuits. The removable terminal block simplifies wiring replacement and maintenance tasks.