Bently Nevada 330171-00-28-10-01-05 3300 XL 5mm Proximity Probe

This 5mm proximity probe provides precise displacement measurements for rotating machinery with space constraints. The 330171-00-28-10-01-05 delivers reliable performance for small turbines, compressors, and high-speed pumps. Its compact tip diameter suits applications where larger probes cannot fit. This transducer integrates seamlessly with 3300 XL monitoring systems for comprehensive machine protection.

Measurement Characteristics and Electrical Ratings

The 330171-00-28-10-01-05 operates using a standard -24V DC negative power supply system. This transducer provides a linear measurement range from 0.25mm to 2.0mm with exceptional accuracy. The probe tip incorporates a hermetically sealed coil that resists moisture and contamination. Moreover, the integrated oscillator generates a stable RF carrier frequency for consistent signal transmission.

Physical Dimensions and Configuration Breakdown

The 330171-00-28-10-01-05 features a compact overall length of 28mm from tip to connector. The part number breakdown reveals specific configuration details for this particular probe variant. The “00” indicates the probe tip uses standard material without additional coating options. The “28” represents the overall length of 28mm, ideal for tight installations. The “10” specifies the cable length of 1.0 meter for direct connector mounting. The “01” indicates the unthreaded length of 1mm for proper insertion depth. Finally, the “05” designates the connector type as a standard 5-pin male plug.

Installation and Mounting Requirements

The 330171-00-28-10-01-05 requires a 5mm threaded hole for proper casing installation. You must set the initial gap correctly to achieve optimal linear performance. The shorter overall length suits applications with limited clearance behind the mounting point. Furthermore, cable routing should avoid sharp bends that can damage internal conductors.

System Integration and Diagnostic Features

The connects directly to 3300 XL proximitors and associated monitoring systems. You can pair this probe with extension cables for remote installation up to 300 meters. The system provides continuous vibration and thrust position monitoring for critical assets. Therefore, this proximity probe delivers essential protection for smaller rotating equipment in demanding applications.