Siemens 6SE4814-3EB11 Programmer Controller

This device serves as a dedicated programmer for SIMOREG K DC converters. The Siemens 6SE4814-3EB11 connects directly to the control board for parameter adjustment. It measures 190 mm in width and 110 mm in height. The unit weighs approximately 0.65 kg for portable handling.

Technical Specifications Table

Parameter	Value
Product Model	Siemens 6SE4814-3EB11
Category	Programmer Controller / Handheld Terminal
Display Type	4-line alphanumeric LCD
Display Resolution	20 characters per line
Dimensions (W x H x D)	190 mm x 110 mm x 35 mm
Weight	0.65 kg
Connection Interface	1 x 25-pin SUB-D male connector
Cable Length	2.5 meters (fixed attached cable)
Internal Components	1 x microprocessor, 1 x EEPROM chip
Keypad Buttons	22 tactile membrane switches
Energy Storage	None (draws power from connected drive)
Operating Voltage	5 V DC via interface cable

Internal Design and Functional Layout

This programmer contains a single 8-bit microprocessor for processing commands. A 4-line LCD screen shows parameters and fault codes clearly. You will find 22 membrane keys for entering values and navigating menus. The device stores no data internally without external power. Instead, it reads and writes directly to the connected drive’s EEPROM. A 2.5-meter cable gives you flexibility during commissioning.

Connection and Usage Guide

First, connect the Siemens 6SE4814-3EB11 to your SIMOREG K drive’s X300 port. Next, power up the drive to supply 5 V DC to the programmer. Then, use the keypad to scroll through parameter groups. Press the P key to enter editing mode for any parameter. The LCD backlight activates automatically in low-light conditions. This programmer supports all SIMOREG K series converters from 15A to 1200A.