Siemens 6AV3535-1FA01-0AX0 Drive Interface

The Siemens 6AV3535-1FA01-0AX0 drive interface operator panel provides local control for SIMOREG DC drives. This panel displays actual values and allows parameter adjustments for drive systems. It connects directly to the drive’s serial interface via a standard cable. You can use this panel as a direct replacement for damaged or missing units.

Detailed Technical Specifications

The Siemens 6AV3535-1FA01-0AX0 drive interface operator panel measures 140 mm in width. Its height reaches 80 mm across the front face. The total depth goes up to 35 mm including the rear connector. This unit weighs approximately 0.32 kilograms for panel mounting.

Key hardware parameters include:

Complete Model: Siemens 6AV3535-1FA01-0AX0
Display type: LCD with LED backlight
Display format: 4 lines x 20 characters per line
Character height: 4.5 mm for clear visibility
Keypad: 16 tactile membrane keys
Interface: RS-232/RS-485 serial (TTL)
Connector: 9-pin SUB-D female
Power supply: 24 V DC nominal (18-30 V range)
Power consumption: 3 W maximum
Parameter memory: 32 KB EEPROM
Protection rating: IP54 front panel (water-resistant)

The Siemens 6AV3535-1FA01-0AX0 drive interface operator panel stores no residual charge after power-off. Therefore, technicians can handle the unit immediately without any delay. The LCD operates reliably from 0°C to +50°C. Moreover, the panel includes contrast adjustment via a rear potentiometer.

Technical Parameter	Specification
Full Model Number	Siemens 6AV3535-1FA01-0AX0
Dimensions (WxHxD)	140 mm x 80 mm x 35 mm
Weight	0.32 kg
Display Type	LCD, LED backlit
Display Format	4 lines x 20 characters
Character Height	4.5 mm
Keypad	16 tactile membrane keys
Interface	RS-232/RS-485 serial
Connector	9-pin SUB-D female
Power Supply	24 V DC (18-30 V)
Power Consumption	3 W max
Parameter Memory	32 KB EEPROM
Protection Rating	IP54 front panel
Operating Temperature	0°C to +50°C
Humidity Tolerance	5% to 85% non-condensing

Application and Installation

The Siemens 6AV3535-1FA01-0AX0 drive interface operator panel mounts into a 140 mm x 80 mm panel cutout. It requires a 4-core cable for connection to the SIMOREG drive. This panel displays actual speed, current, and torque values. Consequently, operators can monitor drive performance without opening the control cabinet.

Programming and Operation

This panel uses simple key sequences for parameter navigation. The Siemens 6AV3535-1FA01-0AX0 stores up to 200 user-configurable drive parameters. You can read and modify P-numbers directly through the menu structure. Therefore, commissioning and troubleshooting require no additional programming tools.

Always power down the drive before connecting or disconnecting this panel. Match the interface cable wiring to the drive manual carefully. The unit features a removable terminal block for power wiring. Furthermore, its IP54 membrane keypad resists dust and water spray from any direction.