Schneider 110CA28202 Cable | 2m | DB9 Male to Female

Signal Transmission and Connectivity

The Schneider 110CA28202 provides reliable signal transmission between automation components. This cable connects field devices to controllers or I/O modules. It ensures stable communication in industrial environments.

Technical Specifications

Parameter	Specification
Model	110CA28202
Category	Cable
Length	2 meters (6.56 feet)
Connector Type 1	1 x DB9 male (9-pin)
Connector Type 2	1 x DB9 female (9-pin)
Wire Gauge	24 AWG (7 strands per conductor)
Number of Conductors	9 (fully populated)
Shielding Type	Braided copper shield (85% coverage)
Outer Diameter	6.5 mm
Cable Jacket Material	PVC (gray)
Temperature Rating	-20°C to +80°C
Voltage Rating	300 V RMS
Connector Housing	Molded PVC with strain relief
Screw Lock Type	#4-40 UNC (both ends)
Internal Components	9 insulated wires, 1 drain wire, 1 foil shield, 1 braided shield
Energy Storage	None (no battery or capacitor)

Cable Construction and Shielding Design

The Schneider 110CA28202 contains nine fully populated 24 AWG conductors. Each conductor uses seven strands for flexibility and durability. A foil shield wraps around all conductors for EMI protection. A braided copper shield provides an additional 85% coverage layer. A bare drain wire connects both shields to the connector shells. The Schneider 110CA28202 uses a gray PVC jacket for chemical resistance.

Connector Configuration and Pin Assignment

This cable features a DB9 male connector on one end. The other end terminates with a DB9 female connector. Both connectors include #4-40 UNC screw locks for secure attachment. The 110CA28202 maintains straight-through pin-to-pin wiring. Pin 1 connects to Pin 1, Pin 2 to Pin 2, and so on. This configuration suits RS-232 and general-purpose serial applications.

Mechanical Durability and Strain Relief

Molded PVC boots cover both connectors for superior strain relief. These boots prevent wire breakage at the connector entry points. The Schneider 110CA28202 withstands repeated bending and flexing. Its 24 AWG stranded conductors resist fatigue from vibration. The cable passes a 5000-cycle flex test without signal degradation. You can route this cable through cable trays or conduit systems.

Physical Dimensions and Installation Guidelines

The Schneider 110CA28202 measures exactly 2 meters from end to end. Its outer diameter of 6.5 mm fits standard cable management systems. Do not bend the cable to a radius smaller than 65 mm. Secure the screw locks finger-tight only to avoid thread damage. Label both ends of the 110CA28202 for easy identification during maintenance. The cable operates reliably from -20°C to +80°C ambient temperature.

Signal Integrity and Application Use

This cable supports RS-232 communication up to 19.2 kbps over 2 meters. The dual shielding eliminates electromagnetic interference from nearby motors. Use the Schneider 110CA28202 to connect programming terminals to PLCs. It also links serial printers, HMIs, or barcode scanners to controllers. The cable stores no electrical energy for safe installation anywhere.