GE IS200WNPSH1A IS200WNPSH1ABA Power Supply

The GE IS200WNPSH1A IS200WNPSH1ABA Power Supply Daughter Card Mark VI IS200 provides regulated DC power to adjacent control boards. You will find this daughter card essential for stable system operation. Its compact form factor plugs directly into the main carrier board.

Dimensions, Weight, and Physical Layout

This power supply daughter card measures 10.2 cm in length and 7.6 cm in width. Its height stays at 1.8 cm including all surface-mounted components. The total weight reaches only 0.21 kilograms for lightweight integration. A four-layer PCB design minimizes voltage drop across power traces.

Power Output Interfaces and Component Count

The GE IS200WNPSH1A IS200WNPSH1ABA Power Supply Daughter Card Mark VI IS200 delivers five independent DC output channels. These outputs provide +5V, +3.3V, +12V, -12V, and +24V respectively. Each channel includes overcurrent and short-circuit protection circuits. In total, this daughter card contains 78 individual electronic components. These include 5 switching regulators, 12 filter capacitors, and 4 inductors.

Energy Storage and Power Specifications

A 5.5V supercapacitor array provides onboard energy storage for 48 hours. This backup maintains output voltages during brief main power interruptions. The card accepts an input range of 18V to 36V DC. Maximum output power reaches 25 watts across all channels combined. Peak conversion efficiency stays above 88% at nominal load.

Environmental Limits and Reliability Features

Therefore, the operating temperature ranges from -40°C to +85°C. Storage temperatures extend from -55°C to +125°C without damage. A built-in temperature sensor triggers thermal shutdown at 100°C. Mean time between failures (MTBF) exceeds 200,000 hours.

Below table summarizes all key technical parameters:

Parameter	Value
Manufacturer	General Electric
Series	Mark VI IS200
Full Product Name	GE IS200WNPSH1A IS200WNPSH1ABA Power Supply Daughter Card Mark VI IS200
Model Numbers	IS200WNPSH1A, IS200WNPSH1ABA
Length	10.2 cm
Width	7.6 cm
Height	1.8 cm
Weight	0.21 kg
PCB Layers	4
Independent DC Outputs	5
Output Voltages	+5V, +3.3V, +12V, -12V, +24V
Protection Features	Overcurrent, short-circuit per channel
Total Components	78
Switching Regulators	5
Filter Capacitors	12
Inductors	4
Onboard Energy Storage	5.5V supercapacitor array, 48-hour backup
Input Voltage Range	18V to 36V DC
Maximum Output Power	25 W
Peak Conversion Efficiency	>88%
Operating Temperature	-40°C to +85°C
Storage Temperature	-55°C to +125°C
Thermal Shutdown	100°C
MTBF	>200,000 hours

Connectors, Mounting, and Additional Features

A 50-pin mezzanine connector interfaces directly with the main carrier board. Four mounting holes accept M2.5 screws for secure attachment. For similar static trip system power needs, see the RMS-TSG-TZ-C model from the same manufacturer. However, this power supply daughter card specializes in distributed local regulation exclusively. The card also includes a green LED for power-good indication.