GE IS200TPROH1B IS200TPROH1BCB | Protective Termination

Core Function and System Role

The GE IS200TPROH1B terminates field wiring with integrated surge protection. Specifically, this board shields sensitive control circuits from voltage spikes. Moreover, it filters electromagnetic interference from industrial environments. The IS200TPROH1BCB variant includes enhanced transient suppression for lightning-prone installations.

Technical Specifications Overview

This protective termination board features sixteen surge-protected input channels. Each channel handles 24 Vdc signals with fast response clamping. Furthermore, the board provides 2500 Vrms isolation between field and logic sides.

Parameter	Specification
Part Number	IS200TPROH1B / IS200TPROH1BCB
Type	Protective Termination Board / Surge Protection Module
Protected Channels	16 Channels
Signal Voltage	24 Vdc Nominal
Clamping Voltage	36 Vdc
Response Time	<1 ns
Surge Current Rating	10 kA (8/20 µs)
Isolation Voltage	2500 Vrms
Input Impedance	10 kΩ
Connector Types	2 x 50-pin D-sub, 2 x Terminal Blocks
Dimensions (W x H x D)	200 x 115 x 30 mm
Weight	0.62 kg
Onboard Energy Storage	16 x 0.1 µF, 100V Capacitors

Connector Layout and Component Count

The board uses two terminal blocks for field wiring connections. For instance, terminals 1-16 accept sensor and switch inputs. Meanwhile, two 50-pin D-sub connectors route protected signals to the controller. The IS200TPROH1BCB adds gas discharge tubes for primary surge protection.

Energy Storage and Signal Protection

This termination board includes local capacitance for high-frequency filtering. Specifically, sixteen 0.1 µF capacitors shunt noise to ground. Therefore, the board passes clean signals while absorbing harmful transients. Additionally, onboard LED indicators show power and channel status. For example, a green LED confirms proper 24 Vdc supply. Red LEDs illuminate when a surge protection device fails.

Diagnostic Features and Fault Indication

The board continuously monitors each surge protection component for degradation. Consequently, it reports end-of-life status before complete failure. Moreover, the GE IS200TPROH1B IS200TPROH1BCB includes visual indicators for each protection channel. This feature allows quick identification of damaged surge suppressors. An onboard status register reports all channel health to the main controller.

Maintenance and Module Replacement

You can replace this termination board without powering down the turbine. Thus, mean time to repair remains under ten minutes. The board contains no field-replaceable fuses or components. Therefore, you simply swap the entire board when surge protection wears out.

Industrial Applications

This protective termination board works inside GE Mark VI control cabinets. For reliable GE surge protection, the IS200TPROH1B and IS200TPROH1BCB deliver exceptional performance. They provide robust transient suppression for steam and gas turbine field wiring.