GE IS200SHRAH2A IS200SHRAH2ACC

Smart Device Communication for Mark VI Systems

The GE IS200SHRAH2A IS200SHRAH2ACC combines analog I/O with HART protocol support. This board belongs to the Mark VI series from General Electric. It communicates with smart transmitters and positioners directly. Therefore, it enables both process control and device diagnostics on the same wiring.

Physical Dimensions and Rack Mounting Details

This analog board measures 26 cm in width, 18 cm in height, and 4 cm in depth. The GE IS200SHRAH2A IS200SHRAH2ACC weighs approximately 0.65 kg, which supports secure rack mounting. Its high-density PCB contains both analog and digital circuits. Consequently, you can install it in any standard Mark VI slot.

Connector Layout and Component Configuration

The GE IS200SHRAH2A IS200SHRAH2ACC features one 96-pin backplane connector for system bus. It also provides two 20-pin terminal headers for field wiring. This board contains eight analog input circuits and eight analog output circuits. Additionally, it includes twelve energy storage capacitors for noise filtering.

Technical Parameter	Specification
Full Model Name	GE IS200SHRAH2A IS200SHRAH2ACC
Manufacturer	General Electric (GE)
Series	Mark VI / Speedtronic
Product Category	HART Analog Input/Output Board
Weight	0.65 kg (1.43 lbs)
Dimensions (W x H x D)	260 mm x 180 mm x 40 mm
Backplane Connector	1 x 96-pin DIN
Field Wiring Headers	2 x 20-pin
Analog Input Channels	8 (16-bit resolution)
Analog Output Channels	8 (16-bit resolution)
HART Modems	16 units (one per channel)
Energy Storage Capacitors	12 units (220 µF each)
Total Capacitance	2,640 µF
Input Range (configurable)	0–20 mA, 4–20 mA, ±10 V
Output Range (configurable)	0–20 mA, 4–20 mA
HART Communication	Bell 202 FSK standard
Operating Temperature	–20°C to +60°C

Energy Storage and Signal Filtering Performance

The GE IS200SHRAH2A IS200SHRAH2ACC stores sufficient energy for stable analog readings. Its twelve capacitors provide 2,640 µF of total capacitance. This storage filters out high-frequency noise from field wiring. Furthermore, each channel includes a dedicated HART modem for digital communication.

Role Within the Mark VI Speedtronic System

You will typically find the GE IS200SHRAH2A IS200SHRAH2ACC in a dedicated analog I/O slot. It connects to smart pressure, temperature, and position transmitters. Moreover, this board supports both HART master and slave operation modes. Its sixteen channels provide full access to device variables and diagnostic data.

Installation and HART Wiring Guidelines

Use the GE IS200SHRAH2A IS200SHRAH2ACC as a direct replacement for older SHRA revisions. Always verify the loop resistance before connecting any HART devices. This analog board requires a stable 24 VDC supply for loop power. It needs no additional configuration for basic analog operation. Simply secure the board with its ejector tabs and connect your shielded twisted-pair wiring.