GE IS200JPDEG1A IS200JPDEG1ABB Battery Distribution Board

The GE IS200JPDEG1A IS200JPDEG1ABB DC Battery Distribution Board distributes battery backup power to critical control circuits. You will find this board essential for maintaining turbine operation during AC power loss. Its high-current design supports 125V DC battery systems reliably.

Dimensions, Weight, and Mechanical Layout

This DC battery distribution board measures 20.5 cm in length and 16.8 cm in width. Its height reaches 4.5 cm including all fuse holders. The total weight stands at 0.88 kilograms for heavy-duty DIN-rail mounting. A flame-retardant UL 94V-0 PCB provides excellent fire safety protection.

Power Output Interfaces and Component Count

The GE IS200JPDEG1A IS200JPDEG1ABB DC Battery Distribution Board offers eight independent fused power outputs. Each output delivers 125V DC at 5 amperes maximum continuous current. You also receive two main input terminals for redundant battery string connection. In total, this board contains 112 individual electronic components. These include 8 fuse holders, 8 LED indicators, and 64 current monitoring resistors.

Fusing and Protection Features

Each output channel includes a 5.0A fast-blow fuse for short-circuit protection. The board also features reverse polarity protection on the main input. Individual red LEDs indicate blown fuse status for each output channel. Consequently, you can quickly identify faulty battery circuits without removing the board.

Environmental Limits and Wiring Specifications

Therefore, the operating temperature ranges from -20°C to +60°C. Storage temperatures extend from -30°C to +85°C without degradation. Main input terminals accept 8 to 14 AWG for high-current battery wiring. Output terminals accept 14 to 22 AWG for control circuit connections.

Below table summarizes all key technical parameters:

Parameter	Value
Manufacturer	General Electric
Series	Mark VI IS200
Full Product Name	GE IS200JPDEG1A IS200JPDEG1ABB DC Battery Distribution Board
Model Numbers	IS200JPDEG1A, IS200JPDEG1ABB
Length	20.5 cm
Width	16.8 cm
Height	4.5 cm
Weight	0.88 kg
PCB Flammability Rating	UL 94V-0
Mounting Type	Heavy-duty DIN-rail
Fused Power Outputs	8
Output Voltage	125V DC
Output Current Capacity	5 A per channel
Main Input Terminals	2 (redundant battery strings)
Total Components	112
Fuse Holders	8
LED Indicators	8 (blown fuse status)
Current Monitoring Resistors	64
Output Fuse Rating	5.0A fast-blow per channel
Reverse Polarity Protection	Built-in on main input
Total Current Capacity	20 A maximum
Main Input Wire Gauge	8 to 14 AWG
Output Wire Gauge	14 to 22 AWG
Operating Temperature	-20°C to +60°C
Storage Temperature	-30°C to +85°C

Connectors, Monitoring, and Additional Features

Two 20-pin ribbon cable headers provide battery status signals to the controller. A single ground bus bar offers common earth connection for all outputs. For similar static trip system battery distribution, see the RMS-TSG-TZ-C model from the same manufacturer. However, this DC battery board specializes in 125V DC backup power exclusively. Mean time between failures (MTBF) exceeds 230,000 hours for passive power components.