MeloAuto-Trusted PLC & DCS Parts Supplier
Key Technical Specifications
This GE DS200TCPSG1A DS200TCPSG1ARE board operates from a 24V DC power supply. It expands 16 protective termination channels for turbine control systems. The unit measures 22 cm in length, 17 cm in width, and 4.5 cm in height. Its total weight reaches 0.7 kg without any packaging materials.
The GE DS200TCPSG1A DS200TCPSG1ARE includes 16 input channels with surge protection. Additionally, it features one 50-pin ribbon connector for host interface. A single 6-pin terminal block connects the DC power input. The board contains 16 surge suppressors, 16 optocouplers, 1 FPGA, 16 status LEDs, 24 resistors, and 16 capacitors.
| Parameter | Value |
|---|---|
| Power Supply | 24V DC ±10%, 200mA |
| Input Channels | 16 protected |
| Surge Protection | 1500V (transient) |
| Response Time | < 1 µs |
| Dimensions (L x W x H) | 22 cm x 17 cm x 4.5 cm |
| Weight | 0.7 kg |
| Input Voltage Range | 0-24V DC |
| Isolation Voltage | 2500V RMS |
| Status LEDs | 16 units (green for active) |
| Host Interface | 50-pin ribbon header |
| Power Connector | 6-pin terminal block |
| Surge Suppressors | 16 units (TVS diodes) |
| Optocouplers | 16 units |
| FPGA | 1 unit |
| Resistors | 24 units |
| Capacitors | 16 units |
| Energy Storage | 47 µF at 35V |
GE DS200TCPSG1A DS200TCPSG1ARE stores energy using one electrolytic capacitor. This capacitor provides 47 µF at 35V rating for transient filtering. Consequently, the board protects downstream circuits during 10 microsecond voltage spikes. Therefore, sensitive electronics remain safe from electrical surges.
Design and Integration
Both the GE DS200TCPSG1A and DS200TCPSG1ARE versions share identical protection circuitry. These boards use four-layer PCB construction with high-voltage isolation barriers for safety. Consequently, the GE DS200TCPSG1A DS200TCPSG1ARE operates reliably from -10°C to +55°C ambient temperature.
For installation, you need M3 screws for the four mounting holes. The board draws 150 mA typical current from the 24V DC supply. Each input channel includes overvoltage clamping at 30V. We recommend using shielded cables for all field connections.
Practical Application
This protective termination expander board shields turbine control inputs from electrical surges. It filters transient voltages from field sensors and switches. The GE DS200TCPSG1A DS200TCPSG1ARE then routes clean signals to the main controller. Therefore, it enhances system reliability in harsh industrial environments.