GE DS200STBAG1A DS200STBAG1ADC Drive Terminal Board

Key Technical Specifications

This GE DS200STBAG1A DS200STBAG1ADC board operates from a 24V DC power supply. It terminates 24 mixed I/O signals for basic drive systems. The unit measures 22 cm in length, 17 cm in width, and 4.5 cm in height. Its total weight reaches 0.7 kg without any packaging materials.

The GE DS200STBAG1A DS200STBAG1ADC includes 16 digital inputs and 8 analog inputs. Additionally, it features one 50-pin ribbon connector for host interface. A single 6-pin terminal block connects the DC power input. The board contains 1 FPGA, 16 optocouplers, 8 analog conditioners, 8 voltage regulators, 24 resistors, and 16 capacitors.

Parameter	Value
Power Supply	24V DC ±10%, 250mA
Digital Inputs	16 channels (24V, sinking)
Analog Inputs	8 channels (0-10V or 4-20mA)
Dimensions (L x W x H)	22 cm x 17 cm x 4.5 cm
Weight	0.7 kg
Input Response Time	< 2 ms
Analog Resolution	12-bit
Accuracy	±0.2% of full scale
Host Interface	50-pin ribbon header
Power Connector	6-pin terminal block
FPGA	1 unit
Optocouplers	16 units (input isolation)
Analog Conditioners	8 units
Voltage Regulators	8 units
Resistors	24 units
Capacitors	16 units
Energy Storage	100 µF at 35V

GE DS200STBAG1A DS200STBAG1ADC stores energy using one electrolytic capacitor. This capacitor provides 100 µF at 35V rating for input filtering. Consequently, the board maintains stable readings during 20 millisecond power fluctuations. Therefore, measurement accuracy remains high in noisy industrial environments.

Design and Integration

Both the GE DS200STBAG1A and DS200STBAG1ADC versions share identical termination circuitry. These boards use four-layer PCB construction with isolated input banks for noise immunity. Consequently, the GE DS200STBAG1A DS200STBAG1ADC operates reliably from -10°C to +55°C ambient temperature.

For installation, you need M3 screws for the four mounting holes. The board draws 200 mA typical current from the 24V DC supply. Each analog input includes software selectable ranges. We recommend using shielded cables for all analog field connections.

Practical Application

This basic drive terminal board connects field sensors to a drive controller. It terminates digital and analog signals from limit switches and transmitters. The GE DS200STBAG1A DS200STBAG1ADC then routes conditioned signals to the host processor. Therefore, it serves as a flexible termination interface for GE basic drive systems.