GE DS200SLCCG1A DS200SLCCG1AGH LAN Comm Card

This GE DS200SLCCG1A DS200SLCCG1AGH LAN Communication Card manages Ethernet-based communication for Mark V systems. The card connects the turbine controller to plant-wide networks seamlessly. You will find this component in many GE power generation applications. The DS200SLCCG1AGH variant includes an extended temperature range for harsh environments.

Technical Specifications

Parameter	Specification
Full Model	GE DS200SLCCG1A DS200SLCCG1AGH LAN Communication Card
Category	LAN Communication Card
Protocol Support	TCP/IP, Modbus TCP, SRTP
Physical Interface	10/100Base-T Ethernet (RJ45)
Network Ports	2 Independent Ports
Data Rate	10/100 Mbps Auto-Sensing
Isolation	1500 V RMS Magnetics
Dimensions (H x W)	230 mm x 160 mm
Weight	Approximately 0.68 kg
Connectors	2 x RJ45, 1 x 50-Pin Header
Component Count	156 Discrete Components
Energy Storage	4 x 47 µF Decoupling Capacitors

Network Protocol and Data Handling Features

The GE DS200SLCCG1A DS200SLCCG1AGH LAN Communication Card supports multiple industrial protocols simultaneously. Each port operates independently for redundant network connections. The card handles TCP/IP stack processing without loading the main CPU. Furthermore, it includes a built-in web server for diagnostic access. Consequently, you can monitor turbine status from any plant workstation.

Installation and Connection Steps

Mount this GE DS200SLCCG1A DS200SLCCG1AGH LAN Communication Card in any Mark V rack slot. First, connect Ethernet cables to the two RJ45 ports securely. After that, assign an IP address using the onboard DIP switches. Then, attach the 50-pin header to the VME backplane adapter. Finally, verify link status LEDs illuminate before attempting network communication.

Energy Discharge and Safety Notice

This GE DS200SLCCG1A DS200SLCCG1AGH LAN Communication Card stores minimal energy in its capacitors. However, you must wait 30 seconds after power removal before handling. The four decoupling capacitors discharge through internal resistors. Never connect Ethernet cables to active PoE switches with this card.

Status Indication and Diagnostics

A green LED indicates valid network link on port one. A yellow LED flashes during active data transmission on port one. Two additional LEDs provide the same status for port two. A red LED illuminates when the card detects a duplicate IP address conflict.