MeloAuto-Trusted PLC & DCS Parts Supplier
The GE DS200SDCCG1A DS200SDCCG1AEC drive control board executes motor control algorithms for Mark V systems. This board manages speed, torque, and position regulation for AC drives. You will find this drive board in GE Mark V drive control cabinets. Its high-performance design ensures precise motor control.
Drive Control Architecture
This drive control board uses a 100 MHz 32-bit RISC processor. Consequently, it handles complex control loops with sub-millisecond cycle times. The GE DS200SDCCG1A DS200SDCCG1AEC includes both analog and digital I/O for drive feedback. Moreover, onboard memory stores configuration parameters and fault logs. You can configure this board for various motor types.
Technical Specifications
| Parameter | Value |
|---|---|
| Processor Speed | 100 MHz |
| CPU Type | 32-bit RISC |
| RAM Capacity | 16 MB SDRAM |
| Flash Memory | 8 MB (application storage) |
| Analog Inputs | 8, 16-bit resolution |
| Analog Outputs | 4, 12-bit resolution |
| Digital I/O | 16, configurable |
| Encoder Inputs | 2, differential (RS-422) |
| Input Voltage | 24V DC ±10% |
| Power Consumption | 10W typical |
| Dimensions | 260mm x 200mm x 40mm |
| Weight | 0.82 kg (1.81 lbs) |
| PCB Layers | 8 |
| Onboard Components | 1 CPU, 8 memory chips, 1 ADC, 4 DACs, 1 watchdog |
| Connector Count | 6 (analog, digital, encoder, power, backplane, diagnostic) |
| Status Indicators | 6 LEDs (run, fault, sync, active, comm, power) |
| Energy Storage | 2200 µF (power hold-up) |
| Watchdog Timeout | 100 ms (software configurable) |
| Operating Temperature | 0°C to +50°C |
| Storage Temperature | -20°C to +70°C |
Motor Control and Feedback Integration
The unit includes encoder inputs for precise speed and position feedback. Therefore, it supports closed-loop control for high-performance applications. This board replaces the DS200SDCCG1AEC version without any program changes. Simply swap the boards and reload application code. GE designed this drive board for single-slot installation. Hence, it fits directly into existing Mark V rack positions.
Eight PCB layers separate high-speed digital traces from analog signals. Six connectors handle all I/O, encoder, power, and diagnostic interfaces. The GE DS200SDCCG1A DS200SDCCG1AEC holds 2200 µF of capacitance for power hold-up. Accordingly, it survives brief power interruptions without resetting. Six status LEDs provide complete operational feedback.
Watchdog and Installation Guide
A hardware watchdog timer resets the processor if software stalls. The board logs watchdog events in non-volatile memory. The GE DS200SDCCG1A DS200SDCCG1AEC works with all GE Mark V I/O modules. Always verify firmware revision compatibility before installation. Proper grounding of the chassis ensures noise-free processor operation.
The board includes differential encoder inputs for noise immunity. These inputs accept standard RS-422 signals from encoders. The GE DS200SDCCG1A DS200SDCCG1AEC delivers reliable drive control for AC motor systems. Installation requires careful handling of static-sensitive components. This board operates in non-condensing environments with adequate cooling.