GE DS200PCCAG1A DS200PCCAG1ABB Power Connect Board

Key Technical Specifications

This GE DS200PCCAG1A DS200PCCAG1ABB board handles 600V AC maximum voltage rating. It distributes 100A continuous current through heavy copper bus bars. The unit measures 27 cm in length, 19 cm in width, and 5.5 cm in height. Its total weight reaches 1.2 kg without any packaging materials.

The GE DS200PCCAG1A DS200PCCAG1ABB includes six copper bus bars for power distribution. Additionally, it features one ground connection point for system safety. A single 8-pin terminal block connects external power cables. The board contains 6 bus bars, 12 terminal studs, 4 voltage taps, 6 insulating standoffs, and 8 mounting brackets.

GE DS200PCCAG1A DS200PCCAG1ABB does not include onboard energy storage. Instead, it provides direct copper paths for power routing. This design minimizes voltage drop across the distribution network. Therefore, the board delivers full input current to connected modules with minimal loss.

Design and Integration

Both the GE DS200PCCAG1A and DS200PCCAG1ABB versions share identical bus bar layout. These boards use high-rigidity FR4 substrate with heavy copper plating for mechanical strength. Consequently, the GE DS200PCCAG1A DS200PCCAG1ABB operates reliably from -20°C to +60°C ambient temperature.

For installation, you need M5 screws for the eight mounting brackets. The board draws zero control current for normal operation. Each bus bar exhibits less than 1 mΩ resistance at 25°C. We recommend using 2 AWG wire for main power input connections.

Practical Application

This power connect board distributes high-current DC bus voltage to multiple drive modules. It routes power from a single source to several inverter or converter stages. The GE DS200PCCAG1A DS200PCCAG1ABB also provides voltage sensing points for feedback circuits. Therefore, it serves as the central power hub for GE DC drive systems.