GE DS200KLDAG1A DS200KLDAG1ACC LED Display Card

Key Technical Specifications

This GE DS200KLDAG1A DS200KLDAG1ACC card operates from a 24V DC power supply. It drives 16 LED segments for system status display. The unit measures 18 cm in length, 13 cm in width, and 3 cm in height. Its total weight equals 0.45 kg without any packaging materials.

The GE DS200KLDAG1A DS200KLDAG1ACC includes 16 discrete LED indicators with custom labels. Additionally, it features one 20-pin ribbon connector for host interface. A single 4-pin terminal block connects the DC power input. The card contains 16 LEDs, 16 current drivers, 1 shift register, 8 resistors, and 4 capacitors.

Parameter	Value
Power Supply	24V DC ±10%, 80mA
Number of LEDs	16 discrete indicators
LED Color	Red (standard)
Segment Display	Custom silk-screen labels
Dimensions (L x W x H)	18 cm x 13 cm x 3 cm
Weight	0.45 kg
LED Current	10 mA per LED (typical)
Brightness	Adjustable via resistor
Host Interface	20-pin ribbon header
Power Connector	4-pin terminal block
LEDs	16 units (5mm)
Current Drivers	16 units (transistor)
Shift Register	1 unit (serial to parallel)
Resistors	8 units (current limiting)
Capacitors	4 units (decoupling)
Energy Storage	10 µF at 35V

GE DS200KLDAG1A DS200KLDAG1ACC stores energy using one ceramic capacitor. This capacitor provides 10 µF at 35V rating for LED hold-up. Consequently, the card maintains display brightness during 5 millisecond power interruptions. Therefore, status information remains visible through brief voltage dips.

Design and Integration

Both the GE DS200KLDAG1A and DS200KLDAG1ACC versions share identical LED driver circuitry. These cards use two-layer PCB construction with clear labeling for easy identification. Consequently, the GE DS200KLDAG1A DS200KLDAG1ACC operates reliably from -10°C to +55°C ambient temperature.

For installation, you need M3 screws for the four mounting holes. The card draws 60 mA typical current from the 24V DC supply. The host interface uses serial data input for LED control. We recommend mounting the card in a visible panel location for easy operator viewing.

Practical Application

This LED display card shows system status and fault conditions for drive or turbine panels. It receives serial data from the main controller and illuminates specific LEDs. The GE DS200KLDAG1A DS200KLDAG1ACC also provides custom silk-screen labels for each indicator. Therefore, it simplifies operator monitoring in GE industrial control systems.