GE DS200IMCPG1C DS200IMCPG1CGC Power Supply Board

Key Technical Specifications

This GE DS200IMCPG1C DS200IMCPG1CGC board accepts 480V AC three-phase input power. It delivers 15A total output current across six regulated DC rails. The unit measures 28 cm in length, 19 cm in width, and 6 cm in height. Its total weight reaches 1.5 kg without any packaging materials.

The GE DS200IMCPG1C DS200IMCPG1CGC includes six isolated output channels for system distribution. Additionally, it features one input EMI filter for noise suppression. A single 5-pin terminal block connects the three-phase AC supply. The board contains 1 transformer, 6 rectifiers, 8 voltage regulators, 14 capacitors, and 22 resistors.

Parameter	Value
Input Voltage	480V AC ±10%, 3-phase, 50/60Hz
Total Output Current	15A (sum of all rails)
Number of Outputs	6 isolated
Output Rails	+5V (3A), +12V (2A), -12V (1A), +15V (2A), -15V (1A), +24V (6A)
Dimensions (L x W x H)	28 cm x 19 cm x 6 cm
Weight	1.5 kg
Input EMI Filter	1 unit (20A rating)
Input Fuse	10A, slow-blow (each phase)
Input Terminal	5-pin, 20A rated
Output Connector	24-pin header
Transformer	1 unit (toroidal, 400VA)
Rectifiers	6 units (bridge type)
Voltage Regulators	8 units (linear and switching)
Capacitors	14 units (filtering)
Resistors	22 units
Energy Storage	3300 µF at 800V

GE DS200IMCPG1C DS200IMCPG1CGC stores energy using two series electrolytic capacitors. Together, they provide 3300 µF at 800V rating for input hold-up. This energy storage maintains all outputs during 60 millisecond AC interruptions. Therefore, the board keeps critical controls operational through short power sags.

Design and Integration

Both the GE DS200IMCPG1C and DS200IMCPG1CGC versions share identical power topology. These boards use four-layer PCB construction with heavy copper for high current paths. Consequently, the GE DS200IMCPG1C DS200IMCPG1CGC operates reliably from -20°C to +55°C ambient temperature.

For installation, you need M4 screws for the six mounting holes. The board draws 10A typical input current at full load. Each output includes short-circuit and overvoltage protection. We recommend using 14 AWG wire for the three-phase AC input connection.

Practical Application

This power supply board converts three-phase 480V AC into stable DC logic power. It feeds processor boards, I/O modules, and communication interfaces in a drive rack. The GE DS200IMCPG1C DS200IMCPG1CGC also provides power good status for each output rail. Therefore, it serves as the main power source for GE industrial drive systems.